lkml.org 
[lkml]   [2014]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/5] drivers: bus: omap_l3: Change pr_crit() to dev_err() when IRQ request fails
Date
Use dev_err() which will going to print the driver's name as well and the
KERN_ERR level is sufficient in this case (we also print via dev_err when
there is an error with the mem resources)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
drivers/bus/omap_l3_noc.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index ed428ada44f7..3a36e3ebcb57 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -162,8 +162,8 @@ static int omap4_l3_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, l3->debug_irq, l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
- pr_crit("L3: request_irq failed to register for 0x%x\n",
- l3->debug_irq);
+ dev_err(&pdev->dev, "request_irq failed for %d\n",
+ l3->debug_irq);
return ret;
}

@@ -171,8 +171,7 @@ static int omap4_l3_probe(struct platform_device *pdev)
ret = devm_request_irq(&pdev->dev, l3->app_irq, l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret)
- pr_crit("L3: request_irq failed to register for 0x%x\n",
- l3->app_irq);
+ dev_err(&pdev->dev, "request_irq failed for %d\n", l3->app_irq);

return ret;
}
--
1.9.0


\
 
 \ /
  Last update: 2014-03-04 10:41    [W:0.047 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site