lkml.org 
[lkml]   [2014]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/6] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Date
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().

However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 6 +-
drivers/usb/dwc3/core.c | 86 +++++++++++++++++++++---
drivers/usb/dwc3/core.h | 7 ++
3 files changed, 89 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index e807635..471366d 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -6,11 +6,13 @@ Required properties:
- compatible: must be "snps,dwc3"
- reg : Address and length of the register set for the device
- interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
- usb-phy : array of phandle for the PHY device. The first element
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
-
-Optional properties:
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.

This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 225a4d6..497234a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
*/
-static void dwc3_core_soft_reset(struct dwc3 *dwc)
+static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
+ int ret;

/* Before Resetting PHY, put Core in Reset */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
@@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)

usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0) {
+ phy_exit(dwc->usb2_generic_phy);
+ return ret;
+ }
mdelay(100);

/* Clear USB3 PHY reset */
@@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ return 0;
}

/**
@@ -381,7 +393,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);

- dwc3_core_soft_reset(dwc);
+ ret = dwc3_core_soft_reset(dwc);
+ if (ret)
+ goto err0;

reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@@ -446,6 +460,8 @@ err2:
err1:
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);

err0:
return ret;
@@ -453,14 +469,12 @@ err0:

static void dwc3_core_exit(struct dwc3 *dwc)
{
- if (!IS_ERR(dwc->usb2_phy))
- usb_phy_shutdown(dwc->usb2_phy);
- if (!IS_ERR(dwc->usb3_phy))
- usb_phy_shutdown(dwc->usb3_phy);
-
dwc3_free_scratch_buffers(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
+
}

#define DWC3_ALIGN_MASK (16 - 1)
@@ -551,6 +565,32 @@ static int dwc3_probe(struct platform_device *pdev)
}
}

+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+ if (IS_ERR(dwc->usb2_generic_phy)) {
+ ret = PTR_ERR(dwc->usb2_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb2_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb2 phy configured\n");
+ return ret;
+ }
+ }
+
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+ if (IS_ERR(dwc->usb3_generic_phy)) {
+ ret = PTR_ERR(dwc->usb3_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb3_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb3 phy configured\n");
+ return ret;
+ }
+ }
+
dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
@@ -607,11 +647,18 @@ static int dwc3_probe(struct platform_device *pdev)

usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
+ ret = phy_power_on(dwc->usb2_generic_phy);
+ if (ret < 0)
+ goto err1;
+
+ ret = phy_power_on(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_power;

ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err1;
+ goto err_usb3phy_power;
}

switch (dwc->dr_mode) {
@@ -680,6 +727,12 @@ err3:
err2:
dwc3_event_buffers_cleanup(dwc);

+err_usb3phy_power:
+ phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+ phy_power_off(dwc->usb2_generic_phy);
+
err1:
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
@@ -697,6 +750,8 @@ static int dwc3_remove(struct platform_device *pdev)

usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);

pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -794,6 +849,8 @@ static int dwc3_suspend(struct device *dev)

usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);

return 0;
}
@@ -802,9 +859,17 @@ static int dwc3_resume(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
unsigned long flags;
+ int ret;

usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_init;

spin_lock_irqsave(&dwc->lock, flags);

@@ -828,6 +893,11 @@ static int dwc3_resume(struct device *dev)
pm_runtime_enable(dev);

return 0;
+
+err_usb2phy_init:
+ phy_exit(dwc->usb2_generic_phy);
+
+ return ret;
}

static const struct dev_pm_ops dwc3_dev_pm_ops = {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 00b0578..def4ebd 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,6 +31,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>

+#include <linux/phy/phy.h>
+
/* Global constants */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
@@ -619,6 +621,8 @@ struct dwc3_scratchpad_array {
* @dr_mode: requested mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @isoch_delay: wValue from Set Isochronous Delay request;
@@ -679,6 +683,9 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;

+ struct phy *usb2_generic_phy;
+ struct phy *usb3_generic_phy;
+
void __iomem *regs;
size_t regs_size;

--
1.7.9.5


\
 
 \ /
  Last update: 2014-03-03 13:21    [W:0.178 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site