lkml.org 
[lkml]   [2014]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] phy/at8031: enable at8031 to work on interrupt mode
Date
On Thursday, March 27, 2014 7:53 PM, Sergei Shtylyov wrote:
> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
> Sent: Thursday, March 27, 2014 7:53 PM
> To: Zhao Qiang-B45475; linuxppc-dev@lists.ozlabs.org;
> netdev@vger.kernel.org; Wood Scott-B07421
> Cc: linux-kernel@vger.kernel.org; davem@davemloft.net;
> mugunthanvnm@ti.com; zonque@gmail.com; helmut.schaa@googlemail.com; Xie
> Xiaobo-R63061
> Subject: Re: [PATCH] phy/at8031: enable at8031 to work on interrupt mode
>
> Hello.
>
> On 27-03-2014 10:18, Zhao Qiang wrote:
>
> > The at8031 can work on polling mode and interrupt mode.
> > Add ack_interrupt and config intr funcs to enable interrupt mode for
> > it.
>
> > Signed-off-by: Zhao Qiang <B45475@freescale.com>
> > ---
> > drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
>
> > diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index
> > bc71947..d034ef5 100644
> > --- a/drivers/net/phy/at803x.c
> > +++ b/drivers/net/phy/at803x.c
> [...]
> > @@ -191,6 +194,31 @@ static int at803x_config_init(struct phy_device
> *phydev)
> > return 0;
> > }
> >
> > +static int at803x_ack_interrupt(struct phy_device *phydev) {
> > + int err;
> > +
> > + err = phy_read(phydev, AT803X_INSR);
>
> Could make this an initializer...

Thank you very much. However I have no idea about "make this an initializer".

>
> > +
> > + return (err < 0) ? err : 0;
> > +}
> > +
> > +static int at803x_config_intr(struct phy_device *phydev) {
> > + int err;
> > + int value;
> > +
> > + value = phy_read(phydev, AT803X_INER);
> > +
> > + if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> > + err = phy_write(phydev, AT803X_INER,
> > + (value | AT803X_INER_INIT));
>
> Inner parens not needed.
>
> > + else
> > + err = phy_write(phydev, AT803X_INER, value);
>
> Why are you not clearing the bits here? Why write back what has been
> read at all?
>
> WBR, Sergei
>
>



\
 
 \ /
  Last update: 2014-03-28 09:21    [W:0.071 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site