lkml.org 
[lkml]   [2014]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v11 0/3] mmc: sdhci-msm: Add support for Qualcomm chipsets
From
On 26 March 2014 17:42, Georgi Djakov <gdjakov@mm-sol.com> wrote:
> Hello Chris, Ulf,
>
> Do you have any comments on the patches?
> The arch code that will use this driver is already in mainline. The
> regulators support seem to be still on its way, but this driver also works
> fine with dummy regulators.

Looks good to me!

For the complete patchset:

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

>
> Thanks,
> Georgi
>
>
>
> On 03/10/2014 05:37 PM, Georgi Djakov wrote:
>>
>> This patchset adds basic support of the Secure Digital Host Controller
>> Interface compliant controller found in Qualcomm SoCs.
>>
>> Tested with eMMC and various micro SD cards on APQ8074 Dragonboard.
>> Applies to linux-next.
>>
>> Changes from v10:
>> - Make reg-names and interrupt-names optional (suggested by Rob Herring)
>> - Use the common names (vmmc, vqmmc) for regulators (suggested by Ulf
>> Hansson)
>> - Use the sdhci core to take care of regulators and clock (suggested by
>> Ulf
>> Hansson and Bjorn Andersson)
>> - Cleanup of unused variables and defines
>>
>> Changes from v9:
>> - Make platform_execute_tuning() static (suggested by Josh Cartwright)
>> - Fix buffer size in platform_execute_tuning() (suggested by Josh
>> Cartwright)
>> - Fix typo in patch subject (suggested by Kumar Gala)
>> - Move voltage ranges from DT to the driver (suggested by Bjorn Andersson)
>> - Simplify sdhci_msm_setup_vreg and irq handler (suggested by Bjorn
>> Andersson)
>> - Disable prw irq in sdhci_msm_remove (suggested by Bjorn Andersson)
>> - Fail on peripheral clock errors (suggested by Bjorn Andersson)
>> - Remove unnecessary core_memres assignment (suggested by Bjorn Andersson)
>> - Fixes on freeing resources in probe() (suggested by Bjorn Andersson)
>>
>> Changes from v8:
>> - Added controller version suffix to the DT compatible string.
>> - Switched Kconfig dependency from ARCH_MSM to the new ARCH_QCOM
>> multiplatform.
>> - Addressed comments from Stephen Boyd on the 3rd patch (execute tunning).
>> - Added signed-off-by lines of the initial driver authors.
>> - Picked up tested-by. https://lkml.org/lkml/2013/11/14/85
>> - Minor changes on comments, prints and formatting.
>>
>> Changes from v7:
>> - Added call to sdhci_get_of_property().
>> - Refactored sdhci_msm_dt_parse_vreg_info().
>> - Fixed possible ERR_PTR() dereferencing.
>> - Updated DT binding documentation.
>> - Removed lpm and currents from DT.
>> - Removed bus-speed-mode from DT.
>> - Updated and moved the sanity checks.
>> - Various typo and coding style fixes.
>> - Added platform_execute_tunning implementation.
>>
>> Changes from v6:
>> - Fixed wrong pointer in sdhci_msm_pwr_irq().
>> - Added platform_execute_tuning() callback as the MSM SDHC does not
>> support tuning as in SDHC 3.0 spec and will need custom implementation
>> in order to support SDR104, HS200 and HS400.
>> - Removed the always-on devicetree property - if the regulator is
>> configured as always-on, it will not be disabled anyway.
>> - Removed devm_pinctrl_get_select_default() - the default pins are
>> already set from the device core.
>> - Removed wrapper function sdhci_msm_set_vdd_io_vol() and enum
>> vdd_io_level and now calling regulator_set_voltage() directly.
>> - Converted #defines to use BIT() macro.
>> - Added IS_ERR(vreg->reg) check at the beginning of sdhci_msm_vreg
>> functions.
>> - Do not print errors when regulators init return -EPROBE_DEFER as the
>> deffered init is not an actual error.
>> - Handle each power irq status bit separately in sdhci_msm_pwr_irq().
>> - Ensure that any pending power irq is acknowledged before enabling it,
>> otherwise the irq handler will be fired prematurely.
>> - Minor changes.
>>
>> Changes from v5:
>> - Driver is split into multiple patches
>> - Do not initialize variables that are assigned later in code
>> - Remove some useless comments
>> - Use shorter variable names
>> - Change pr_err() to dev_err()
>> - Optimized sdhci_msm_setup_vreg()
>> - Some code alignment fixes
>> - Improved DT values sanity check
>> - Added dev_dbg print for sdhci controller version in probe()
>> - Added usleep_range() after SW reset - it can take some time
>> - Added SDHCI_QUIRK_SINGLE_POWER_WRITE - power handled by PMIC
>> - Renamed DT property vdd-io to vddio
>>
>> Changes from v4:
>> - Simplified sdhci_msm_vreg_disable() and sdhci_msm_set_vdd_io_vol()
>> - Use devm_ioremap_resource() instead of devm_ioremap()
>> - Converted IS_ERR_OR_NULL to IS_ERR
>> - Disable regulators in sdhci_msm_remove()
>> - Check for DT node at the beginning in sdhci_msm_probe()
>> - Removed more redundant code
>> - Changes in some error messages
>> - Minor fixes
>>
>> Changes from v3:
>> - Allocate memory for all required structs at once
>> - Added termination entry in sdhci_msm_dt_match[]
>> - Fixed a missing sdhci_pltfm_free() in probe()
>> - Removed redundant of_match_ptr
>> - Removed the unneeded function sdhci_msm_vreg_reset()
>>
>> Changes from v2:
>> - Added DT bindings for clocks
>> - Moved voltage regulators data to platform data
>> - Removed unneeded includes
>> - Removed obsolete and wrapper functions
>> - Removed error checking where unnecessary
>> - Removed redundant _clk suffix from clock names
>> - Just return instead of goto where possible
>> - Minor fixes
>>
>> Georgi Djakov (3):
>> mmc: sdhci-msm: Qualcomm SDHCI binding documentation
>> mmc: sdhci-msm: Initial support for Qualcomm chipsets
>> mmc: sdhci-msm: Add platform_execute_tuning implementation
>>
>> .../devicetree/bindings/mmc/sdhci-msm.txt | 55 ++
>> drivers/mmc/host/Kconfig | 13 +
>> drivers/mmc/host/Makefile | 1 +
>> drivers/mmc/host/sdhci-msm.c | 618
>> ++++++++++++++++++++
>> 4 files changed, 687 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
>> create mode 100644 drivers/mmc/host/sdhci-msm.c
>>
>


\
 
 \ /
  Last update: 2014-03-27 00:41    [W:0.089 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site