lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[char-misc-next] mei: me: do not load the driver if the FW doesn't support MEI interface
Date
NM and SPS  FW types that may run on ME device on server platforms
do not have valid MEI/HECI interface and driver should not
be bound to it as this might lead to system hung.
In practice not all BIOSes effectively hide such devices from the
OS and in some cases it is not possible.

We determine FW type by examining Host FW status registers in order to
unbind the driver.
In this patch we are adding check for ME on Cougar Point, Lynx Point
Devices

Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
drivers/misc/mei/hw-me-regs.h | 5 +++++
drivers/misc/mei/pci-me.c | 30 +++++++++++++++++++++++-------
2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 72ba4d5..a7856c0 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -115,6 +115,11 @@
#define MEI_DEV_ID_LPT_HR 0x8CBA /* Lynx Point H Refresh */

#define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */
+
+/* Host Firmware Status Registers in PCI Config Space */
+#define PCI_CFG_HFS_1 0x40
+#define PCI_CFG_HFS_2 0x48
+
/*
* MEI HW Section
*/
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index bc3e043..88516b0 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -107,15 +107,31 @@ static bool mei_me_quirk_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
u32 reg;
- if (ent->device == MEI_DEV_ID_PBG_1) {
- pci_read_config_dword(pdev, 0x48, &reg);
- /* make sure that bit 9 is up and bit 10 is down */
- if ((reg & 0x600) == 0x200) {
- dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
- return false;
- }
+ /* Cougar Point || Patsburg */
+ if (ent->device == MEI_DEV_ID_CPT_1 ||
+ ent->device == MEI_DEV_ID_PBG_1) {
+ pci_read_config_dword(pdev, PCI_CFG_HFS_2, &reg);
+ /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+ if ((reg & 0x600) == 0x200)
+ goto no_mei;
}
+
+ /* Lynx Point */
+ if (ent->device == MEI_DEV_ID_LPT_H ||
+ ent->device == MEI_DEV_ID_LPT_W ||
+ ent->device == MEI_DEV_ID_LPT_HR) {
+ /* Read ME FW Status check for SPS Firmware */
+ pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
+ /* if bits [19:16] = 15, running SPS Firmware */
+ if ((reg & 0xf0000) == 0xf0000)
+ goto no_mei;
+ }
+
return true;
+
+no_mei:
+ dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
+ return false;
}
/**
* mei_probe - Device Initialization Routine
--
1.8.5.3


\
 
 \ /
  Last update: 2014-03-25 21:01    [W:0.033 / U:2.180 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site