lkml.org 
[lkml]   [2014]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation
On 03/21/2014 12:43 PM, Alexandre Belloni wrote:
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> .../devicetree/bindings/clock/berlin-clock.txt | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> new file mode 100644
> index 000000000000..ebc78f9b93a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> @@ -0,0 +1,29 @@
> +Device Tree Clock bindings for Marvell Berlin clocks
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be one of the following:
> + "marvell,berlin2-pll" or

nit: just use a comma instead of "or" otherwise that "or" will
be pushed to the new last compatible every time we add a compatible.

> + "marvell,berlin2q-pll":
> + CPU PLL and System PLL
> +- reg : Address and length of the clock register set.
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall be the input parent clock phandle for the clock.
> +
> +smclk: sysmgr-clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> +};
> +
> +cpupll: cpupll {

Reminder: Should receive an update when you change the corresponding
nodes to cpupll: pll@foo

> + compatible = "marvell,berlin2-pll";
> + clocks = <&smclk>;
> + #clock-cells = <0>;
> + reg = <0xf7ea003c 8>;
> +};
> +
> +
>



\
 
 \ /
  Last update: 2014-03-21 13:41    [W:0.144 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site