[lkml]   [2014]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 7/8] ASoC: atmel: document clock properties of the wm8904 driver
Hi Mark Brown,

On 03/20/2014 09:47 PM, Mark Brown wrote:
> On Thu, Mar 20, 2014 at 10:37:53AM +0800, Bo Shen wrote:
>> For this, in my mind, I think we need add following parameters in DT.
>> 1. sysclk_src_from_fll --> we need do nothing.
> No, how would this work? If nothing else the FLL needs configuration.

Only configure it in machine driver. Then no DT operation.

>> 2. sysclk_src_from_mclk
>> 2.1 use_external_xtal --> we need clock_frequency
>> 2.2 !use_external_xtal --> we need retrieve clock and clock_frequency.
> No, this is all handled in the clock binding. If there's a fixed rate
> clock the device tree should have a fixed rate clock provided.
>> Does this acceptable? Or any other better suggestion for this?
> Just have the device tree describe the hardware and provide a way of
> specifying an optional MCLK.

I will implement an RFC patch, please help review it. Thanks.

Best Regards,
Bo Shen

 \ /
  Last update: 2014-03-21 04:22    [W:0.059 / U:5.612 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site