lkml.org 
[lkml]   [2014]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 01/11] of: document bindings for reserved-memory nodes
Date
On Fri, 28 Feb 2014 10:54:14 +0100, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> Hello,
>
> On 2014-02-26 12:51, Grant Likely wrote:
> > On Fri, 21 Feb 2014 13:25:17 +0100, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> > > From: Grant Likely <grant.likely@linaro.org>
> > >
> > > Reserved memory nodes allow for the reservation of static (fixed
> > > address) regions, or dynamically allocated regions for a specific
> > > purpose.
> > >
> > > Signed-off-by: Grant Likely <grant.likely@linaro.org>
> > > [joshc: Based on binding document proposed (in non-patch form) here:
> > > http://lkml.kernel.org/g/20131030134702.19B57C402A0@trevor.secretlab.ca
> > > adapted to support #memory-region-cells]
> > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
> > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> > > ---
> > > .../bindings/reserved-memory/reserved-memory.txt | 138 ++++++++++++++++++++
> > > 1 file changed, 138 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> > > new file mode 100644
> > > index 000000000000..a606ce90c9c4
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> > > @@ -0,0 +1,138 @@
> > > +*** Reserved memory regions ***
> > > +
> > > +Reserved memory is specified as a node under the /reserved-memory node.
> > > +The operating system shall exclude reserved memory from normal usage
> > > +one can create child nodes describing particular reserved (excluded from
> > > +normal use) memory regions. Such memory regions are usually designed for
> > > +the special usage by various device drivers.
> > > +
> > > +Parameters for each memory region can be encoded into the device tree
> > > +with the following nodes:
> > > +
> > > +/reserved-memory node
> > > +---------------------
> > > +#address-cells, #size-cells (required) - standard definition
> > > + - Should use the same values as the root node
> > > +#memory-region-cells (required) - dictates number of cells used in the child
> > > + nodes memory-region specifier
> >
> > I still don't like this portion of the binding. I'm not convinced that
> > it is necessary in the majority of cases and it is going to be very
> > driver specific. I would rather drop it entirely from the common
> > binding. If a specific driver needs to do something like the above then
> > it can have a driver specific binding. Otherwise I think the default
> > should be a simple phandle with no arguments to a single reserved memory
> > node.
> >
> > Ben, can you weigh in on the current state of this document. I'm mostly
> > happy with it aside from my comment above. Do you think this is ready to
> > be merged?
> >
> > > +ranges (required) - standard definition
> > > + - Should be empty
> > > +
> > > +/reserved-memory/ child nodes
> > > +-----------------------------
> > > +Each child of the reserved-memory node specifies one or more regions of
> > > +reserved memory. Each child node may either use a 'reg' property to
> > > +specify a specific range of reserved memory, or a 'size' property with
> > > +optional constraints to request a dynamically allocated block of memory.
> > > +
> > > +Following the generic-names recommended practice, node names should
> > > +reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
> > > +address (@<address>) should be appended to the name if the node is a
> > > +static allocation.
> > > +
> > > +Properties:
> > > +Requires either a) or b) below.
> > > +a) static allocation
> > > + reg (required) - standard definition
> > > +b) dynamic allocation
> > > + size (required) - length based on parent's #size-cells
> > > + - Size in bytes of memory to reserve.
> > > + alignment (optional) - length based on parent's #size-cells
> > > + - Address boundary for alignment of allocation.
> > > + alloc-ranges (optional) - prop-encoded-array (address, length pairs).
> > > + - Specifies regions of memory that are
> > > + acceptable to allocate from.
> > > +
> > > +If both reg and size are present, then the reg property takes precedence
> > > +and size is ignored.
> > > +
> > > +Additional properties:
> > > +compatible (optional) - standard definition
> > > + - may contain the following strings:
> > > + - shared-dma-pool: This indicates a region of memory meant to be
> > > + used as a shared pool of DMA buffers for a set of devices. It can
> > > + be used by an operating system to instanciate the necessary pool
> > > + management subsystem if necessary.
> > > + - vendor specific string in the form <vendor>,[<device>-]<usage>
> >
> > Add "Use vendor strings to identify regions dedicates for a specific
> > vendor device. For example: 'acme,framebuffer'. Platform code can use vendor
> > strings to identify device specific regions"
>
> So do you want to completely drop phandle based links between device
> nodes and memory regions?

I meant nothing of the sort. That was merely a comment to clarify the
documentation. I wrote 'can' not 'must'.

g.


\
 
 \ /
  Last update: 2014-03-02 11:01    [W:0.080 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site