lkml.org 
[lkml]   [2014]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/5] ARM: dts: AM4372: Add USB nodes
Date
Add nodes for 2 instances each of
- ocp2scp
- USB PHY control module
- USB PHY
- dwc3_omap
- USB

for AM43xx.

Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 94 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 36d523a..cedb9d4 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -735,6 +735,100 @@
#size-cells = <1>;
status = "disabled";
};
+
+ am43xx_control_usb2phy1: control-phy@44e10620 {
+ compatible = "ti,control-phy-usb2-am437";
+ reg = <0x44e10620 0x4>;
+ reg-names = "power";
+ };
+
+ am43xx_control_usb2phy2: control-phy@0x44e10628 {
+ compatible = "ti,control-phy-usb2-am437";
+ reg = <0x44e10628 0x4>;
+ reg-names = "power";
+ };
+
+ ocp2scp0: ocp2scp@483a8000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp0";
+
+ usb2_phy1: phy@483a8000 {
+ compatible = "ti,am437x-usb2";
+ reg = <0x483a8000 0x8000>;
+ ctrl-module = <&am43xx_control_usb2phy1>;
+ clocks = <&usb_phy0_always_on_clk32k>,
+ <&usb_otg_ss0_refclk960m>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ ocp2scp1: ocp2scp@483e8000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp1";
+
+ usb2_phy2: phy@483e8000 {
+ compatible = "ti,am437x-usb2";
+ reg = <0x483e8000 0x8000>;
+ ctrl-module = <&am43xx_control_usb2phy2>;
+ clocks = <&usb_phy1_always_on_clk32k>,
+ <&usb_otg_ss1_refclk960m>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ dwc3_1: omap_dwc3@48380000 {
+ compatible = "ti,am437x-dwc3";
+ ti,hwmods = "usb_otg_ss0";
+ reg = <0x48380000 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <1>;
+ ranges;
+
+ usb1: usb@48390000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x48390000 0x17000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
+
+ dwc3_2: omap_dwc3@483c0000 {
+ compatible = "ti,am437x-dwc3";
+ ti,hwmods = "usb_otg_ss1";
+ reg = <0x483c0000 0x10000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <1>;
+ ranges;
+
+ usb2: usb@483d0000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x483d0000 0x17000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
};
};

--
1.8.3.1


\
 
 \ /
  Last update: 2014-03-19 13:01    [W:0.106 / U:12.088 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site