Messages in this thread | | | Date | Fri, 14 Mar 2014 06:37:08 +0100 | From | Michal Simek <> | Subject | Re: Zynq macb |
| |
On 03/13/2014 11:33 PM, Sören Brinkmann wrote: > On Thu, 2014-03-13 at 03:16PM -0700, Sören Brinkmann wrote: >> Hi Nicolas, >> >> I did some testing on the current linux-next tree and ran iperf on Zynq. >> It seems that network and even the whole system can collapse when doing >> that. >> I don't really know what's going on, but once I saw the message: >> "inconsistent Rx descriptor chain" >> printed twice (system frozen afterwards). >> >> I don't know what exactly is going wrong, but suspect something around >> memory/DMA. I have no clue whether it makes any sense or not, but I >> tried using the macb_* functions instead of the gem_* ones (see diff below). >> That seems to result in a stable system and working Ethernet. > > That was a little too early. After roughly 25 minutest the system runs > into a deadlock: > BUG: spinlock lockup suspected on CPU#1, iperf/774 > lock: 0xeda0366c, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 > CPU: 1 PID: 774 Comm: iperf Tainted: G W 3.14.0-rc6-next-20140312-xilinx-dirty #41 > [<c00153c0>] (unwind_backtrace) from [<c0011e70>] (show_stack+0x10/0x14) > [<c0011e70>] (show_stack) from [<c03d6b50>] (dump_stack+0x80/0xcc) > [<c03d6b50>] (dump_stack) from [<c00670ac>] (do_raw_spin_lock+0xd4/0x190) > [<c00670ac>] (do_raw_spin_lock) from [<c03dc79c>] (_raw_spin_lock_irqsave+0x58/0x64) > [<c03dc79c>] (_raw_spin_lock_irqsave) from [<c02b0810>] (macb_start_xmit+0x24/0x2d0) > [<c02b0810>] (macb_start_xmit) from [<c0321b10>] (dev_hard_start_xmit+0x334/0x470) > [<c0321b10>] (dev_hard_start_xmit) from [<c0339aa8>] (sch_direct_xmit+0x78/0x2f8) > [<c0339aa8>] (sch_direct_xmit) from [<c0321f60>] (__dev_queue_xmit+0x314/0x704) > [<c0321f60>] (__dev_queue_xmit) from [<c034cb3c>] (ip_finish_output+0x6c4/0x894) > [<c034cb3c>] (ip_finish_output) from [<c034cf24>] (ip_local_out+0x74/0x90) > [<c034cf24>] (ip_local_out) from [<c034d340>] (ip_queue_xmit+0x400/0x5c4) > [<c034d340>] (ip_queue_xmit) from [<c03634b8>] (tcp_transmit_skb+0xa18/0xab0) > [<c03634b8>] (tcp_transmit_skb) from [<c035856c>] (tcp_recvmsg+0x92c/0xae4) > [<c035856c>] (tcp_recvmsg) from [<c03806f0>] (inet_recvmsg+0x1c0/0x1fc) > [<c03806f0>] (inet_recvmsg) from [<c030769c>] (sock_recvmsg+0x7c/0x98) > [<c030769c>] (sock_recvmsg) from [<c0309988>] (SyS_recvfrom+0x9c/0x108) > [<c0309988>] (SyS_recvfrom) from [<c0309a08>] (sys_recv+0x14/0x18) > [<c0309a08>] (sys_recv) from [<c000ea60>] (ret_fast_syscall+0x0/0x48)
Do you have this change in your tree? https://github.com/Xilinx/linux-xlnx/commit/1a85939af40acca2bf963407b497cc31c303ff3e
I don't think we have sent this to mainline yet.
Thanks, Michal
-- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[unhandled content-type:application/pgp-signature] | |