lkml.org 
[lkml]   [2014]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
From
Date
On Sat, 2014-03-15 at 02:02 +0800, Chew Chiau Ee wrote:
> From: Chew, Chiau Ee <chiau.ee.chew@intel.com>
>
> This is to disable/enable DW_DMAC hw during late suspend/early resume.
> Since DMA is providing service to other clients (eg: SPI, HSUART),
> we need to ensure DMA suspends after the clients and resume
> before the clients are active.

Thanks for an update!

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

P.S. It seems a material is for v3.16?

>
> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
> ---
> v2 changelog:
> * Change suspend_noirq and resume_noirq callback to suspend_late
> and resume_early.
>
> drivers/dma/dw/pci.c | 33 +++++++++++++++++++++++++++++++++
> 1 files changed, 33 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c
> index 755cc6b..fec59f1 100644
> --- a/drivers/dma/dw/pci.c
> +++ b/drivers/dma/dw/pci.c
> @@ -75,6 +75,36 @@ static void dw_pci_remove(struct pci_dev *pdev)
> dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret);
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +
> +static int dw_pci_suspend_late(struct device *dev)
> +{
> + struct pci_dev *pci = to_pci_dev(dev);
> + struct dw_dma_chip *chip = pci_get_drvdata(pci);
> +
> + return dw_dma_suspend(chip);
> +};
> +
> +static int dw_pci_resume_early(struct device *dev)
> +{
> + struct pci_dev *pci = to_pci_dev(dev);
> + struct dw_dma_chip *chip = pci_get_drvdata(pci);
> +
> + return dw_dma_resume(chip);
> +};
> +
> +#else /* !CONFIG_PM_SLEEP */
> +
> +#define dw_pci_suspend_late NULL
> +#define dw_pci_resume_early NULL
> +
> +#endif /* !CONFIG_PM_SLEEP */
> +
> +static const struct dev_pm_ops dw_pci_dev_pm_ops = {
> + .suspend_late = dw_pci_suspend_late,
> + .resume_early = dw_pci_resume_early,
> +};
> +
> static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
> /* Medfield */
> { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
> @@ -95,6 +125,9 @@ static struct pci_driver dw_pci_driver = {
> .id_table = dw_pci_id_table,
> .probe = dw_pci_probe,
> .remove = dw_pci_remove,
> + .driver = {
> + .pm = &dw_pci_dev_pm_ops,
> + },
> };
>
> module_pci_driver(dw_pci_driver);


--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy



\
 
 \ /
  Last update: 2014-03-14 13:02    [W:0.088 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site