lkml.org 
[lkml]   [2014]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 0/9] USB Host support for OMAP5 uEVM
Hi Lee,

On 02/27/2014 04:18 PM, Roger Quadros wrote:
> Hi,
>
> This patchset brings up USB Host ports and Ethernet port on
> the OMAP5 uEVM board.
>
> It also does some cleanup with respect to DT clock binding
> for the mfd/omap-usb-host driver.
>
> Please queue these for -next.
>
> Lee,
>
> I've folded some platform data dependent patches with mfd patches
> so that they don't break functionality when applied individually.
> You can safely pull in all MFD patches (1 to 6).
>
> Tony & Benoit,
>
> Can you please accept patches 7, 8 and 9?

Tony has already picked up 7,8 and 9 through omap-soc tree.

Since you acked most patches except 5 and 6, are you fine if Tony takes
all the patches 1 to 4 in this series via omap-soc tree?

What about patches 5 and 6?

cheers,
-roger

>
> Thanks.
>
> Tested on:
> - OMAP5 uEVM
> - Pandaboard ES Rev. B1
> - Beagleboard-XM Rev C2 (DT + Legacy)
> - Beagleboard Rev C4 (DT + Legacy)
>
> Changelog:
>
> v9:
> - Folded dependent platform data patches into MFD patches.
>
> v8:
> - Addressed review comments and split patch
> "mfd: omap-usb-host: Get clocks based on hardware revision"
> - Removed unnecessary usb host dummy clocks on OMAP3
> - Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
> - Rebased on 3.14-rc3
>
> v7:
> - Rebased on 3.14-rc2
> - Removed incompatible ids from DT files and examples
>
> v6:
> - Initialized clocks to -ENODEV and split patch 3.
>
> v5:
> - Expose all clocks in the DT binding document for mfd:omap-usb-host
> and mfd:omap-usb-tll
>
> v4:
> - Updated DT binding document for clock binding
>
> v3:
> - Rebased on top of 3.13-rc7
>
> cheers,
> -roger
>
> ---
> Roger Quadros (9):
> mfd: omap-usb-host: Get clocks based on hardware revision
> mfd: omap-usb-host: Always fail on clk_get() error
> mfd: omap-usb-host: Use proper clock name instead of alias
> mfd: omap-usb-host: Use clock names as per function for reference
> clocks
> mfd: omap-usb-host: Update DT clock binding information
> mfd: omap-usb-tll: Update DT clock binding information
> ARM: OMAP2+: Remove legacy_init_ehci_clk()
> ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
> usb: omap: dts: Update DT binding example usage
>
> .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
> .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
> .../devicetree/bindings/usb/ehci-omap.txt | 2 +-
> .../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4.dtsi | 10 +-
> arch/arm/boot/dts/omap5-uevm.dts | 8 +-
> arch/arm/boot/dts/omap5.dtsi | 10 +-
> arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
> arch/arm/mach-omap2/pdata-quirks.c | 16 ---
> drivers/clk/ti/clk-3xxx.c | 4 -
> drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
> 14 files changed, 135 insertions(+), 88 deletions(-)
>



\
 
 \ /
  Last update: 2014-03-11 12:02    [W:0.299 / U:9.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site