lkml.org 
[lkml]   [2014]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 0/8] ARM: brcmstb: Add Broadcom STB SoC support
    Date
    This patchset contains the board support package for the
    Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
    minimal set of code needed for a BCM7445-based board to boot
    the Linux kernel.

    These changes heavily leverage the OF/devicetree framework.

    v6:
    - rebased to v3.14-rc1
    - utilize common APIs for handling CPU power-down
    - drop deprecated __cpuinit attributes

    v5 (https://lkml.org/lkml/2014/1/21/640):
    - rebased to v3.13 tag
    - make UART DT node a child of 'rdb' node
    - fix ordering of debug UART entries

    v4 (https://lkml.org/lkml/2014/1/17/455):
    - make a reboot driver and put it in the drivers folder
    - rework DT bindings to leverage 'syscon'
    - rework BSP code to use 'syscon' for all register mappings
    - misc. tweaks per suggestions from v3

    v3 (https://lkml.org/lkml/2014/1/14/696):
    - rebased to v3.13-rc8
    - switched to using 'multi_v7_defconfig'
    - eliminated dependence on compile-time peripheral register access
    - moved DT node iomap out from 'init_early'
    - misc. minor cleanups from mailing-list discussion for v2

    v2 (https://lkml.org/lkml/2013/11/26/570):
    - rebased to v3.13-rc1
    - moved implementation to 'mach-bcm' folder
    - added CPU init for B16RM

    v1:
    - initial submission

    [1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445

    Marc Carino (8):
    ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
    power: reset: Add reboot driver for brcmstb
    ARM: brcmstb: add debug UART for earlyprintk support
    ARM: do CPU-specific init for Broadcom Brahma15 cores
    ARM: brcmstb: add CPU binding for Broadcom Brahma15
    ARM: brcmstb: add misc. DT bindings for brcmstb
    ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
    ARM: brcmstb: dts: add a reference DTS for Broadcom 7445

    .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
    Documentation/devicetree/bindings/arm/cpus.txt | 1 +
    Documentation/devicetree/bindings/arm/gic.txt | 1 +
    arch/arm/Kconfig.debug | 15 +-
    arch/arm/boot/dts/bcm7445.dts | 111 +++++++
    arch/arm/configs/multi_v7_defconfig | 1 +
    arch/arm/mach-bcm/Kconfig | 15 +
    arch/arm/mach-bcm/Makefile | 4 +
    arch/arm/mach-bcm/brcmstb.c | 104 +++++++
    arch/arm/mach-bcm/brcmstb.h | 38 +++
    arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++
    arch/arm/mach-bcm/hotplug-brcmstb.c | 311 ++++++++++++++++++++
    arch/arm/mm/proc-v7.S | 11 +
    drivers/power/reset/Kconfig | 10 +
    drivers/power/reset/Makefile | 1 +
    drivers/power/reset/brcmstb-reboot.c | 120 ++++++++
    16 files changed, 870 insertions(+), 1 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
    create mode 100644 arch/arm/boot/dts/bcm7445.dts
    create mode 100644 arch/arm/mach-bcm/brcmstb.c
    create mode 100644 arch/arm/mach-bcm/brcmstb.h
    create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
    create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
    create mode 100644 drivers/power/reset/brcmstb-reboot.c



    \
     
     \ /
      Last update: 2014-02-03 23:21    [W:0.026 / U:30.316 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site