lkml.org 
[lkml]   [2014]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 02/11] HID: i2c-hid: implement ll_driver transport-layer callbacks
From
Hi

On Sun, Feb 2, 2014 at 5:50 AM, Benjamin Tissoires
<benjamin.tissoires@redhat.com> wrote:
> Add output_report and raw_request to i2c-hid.
> Hopefully, we will manage to have the same transport level between
> all the transport drivers.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> ---
> drivers/hid/i2c-hid/i2c-hid.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index ce68a12..5099f1f 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -574,6 +574,28 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
> return ret;
> }
>
> +static int i2c_hid_output_report(struct hid_device *hid, __u8 *buf,
> + size_t count)
> +{
> + return i2c_hid_output_raw_report(hid, buf, count, HID_OUTPUT_REPORT);
> +}
> +
> +static int i2c_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
> + __u8 *buf, size_t len, unsigned char rtype,
> + int reqtype)
> +{
> + switch (reqtype) {
> + case HID_REQ_GET_REPORT:
> + return i2c_hid_get_raw_report(hid, reportnum, buf, len, rtype);
> + case HID_REQ_SET_REPORT:
> + if (buf[0] != reportnum)
> + return -EINVAL;
> + return i2c_hid_output_raw_report(hid, buf, len, rtype);

I just skimmed the I2C-HID specs and it defines three methods for
input/output reports:

1) Section 6.2:
raw async output-reports can be sent by writing the data at any time
to wOutputRegister.
This should be used as method for hid->output_report().

2) Section 7.1:
SET_REPORT can be issued by writing the right OPCODE + report-ID into
wCommandRegister and the data into wDataRegister.
This should be used as method for hid->raw_request() + HID_REQ_SET_REPORT.

3) Section 7.1:
GET_REPORT can be issued by writing the right OPCODE + report-ID into
wCommandRegister and then waiting for the device to write the data
into wDataRegister.
This should be used for hid->raw_request() + HID_REQ_GET_REPORT


The GET_REPORT implementation looks fine to me, but the
i2c_hid_set_report() seems to support both 1) and 2) depending on the
passed type and capabilities:
- it uses 2) for FEATURE_REPORT reports or if the max OUTPUT_LENGTH is 0
- it uses 1) otherwise

I'm not sure whether the i2c-hid-spec mandates this behavior, so I am
not saying it's wrong. I just wanna understand what we do here. So if
we use hid->output_report() with HID_FEATURE_REPORT, the current code
turns this into a SET_REPORT. Likewise, an hid->raw_request() with
HID_REQ_SET_REPORT but with HID_OUTPUT_REPORT turns into an
output-report.

I'd rather expect this behavior:

hid->output_report() should always do this:
args[index++] = outputRegister & 0xFF;
args[index++] = outputRegister >> 8;
hidcmd = &hid_no_cmd;

while hid->raw_request() should always do this:
args[index++] = dataRegister & 0xFF;
args[index++] = dataRegister >> 8;

The special case for maxOutputLength==0 seems fine to me, but the
"reportType == 0x03" looks weird.


Thanks
David

> + default:
> + return -EIO;
> + }
> +}
> +
> static void i2c_hid_request(struct hid_device *hid, struct hid_report *rep,
> int reqtype)
> {
> @@ -761,6 +783,8 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
> .close = i2c_hid_close,
> .power = i2c_hid_power,
> .request = i2c_hid_request,
> + .output_report = i2c_hid_output_report,
> + .raw_request = i2c_hid_raw_request,
> };
>
> static int i2c_hid_init_irq(struct i2c_client *client)
> --
> 1.8.3.1
>


\
 
 \ /
  Last update: 2014-02-03 17:41    [W:0.254 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site