lkml.org 
[lkml]   [2014]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] clk: at91: propagate rate change on system clks
Date
System clks are just gates, and thus do not provide any rate operations.
Authorize clk rate change to be propagated to system clk parents.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
drivers/clk/at91/clk-system.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 8f7c043..a98557b 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -84,7 +84,8 @@ at91_clk_register_system(struct at91_pmc *pmc, const char *name,
* (see drivers/memory) which would request and enable the ddrck clock.
* When this is done we will be able to remove CLK_IGNORE_UNUSED flag.
*/
- init.flags = CLK_IGNORE_UNUSED;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED;

sys->id = id;
sys->hw.init = &init;
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-03 13:01    [W:0.058 / U:1.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site