lkml.org 
[lkml]   [2014]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] HID: cp2112: remove various hid_out_raw_report calls
Date
hid_out_raw_report is going to be obsoleted as it is not part of the
unified HID low level transport documentation
(Documentation/hid/hid-transport.txt)

hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
is strictly equivalent to:
hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);

So use the new api.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
drivers/hid/hid-cp2112.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 1025982..860db694 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -185,8 +185,8 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
buf[1] &= ~(1 << offset);
buf[2] = gpio_push_pull;

- ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
- HID_FEATURE_REPORT);
+ ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
return ret;
@@ -207,8 +207,8 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
buf[1] = value ? 0xff : 0;
buf[2] = 1 << offset;

- ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
- HID_FEATURE_REPORT);
+ ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
hid_err(hdev, "error setting GPIO values: %d\n", ret);
}
@@ -253,8 +253,8 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
buf[1] |= 1 << offset;
buf[2] = gpio_push_pull;

- ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf),
- HID_FEATURE_REPORT);
+ ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+ HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
return ret;
--
1.8.5.3


\
 
 \ /
  Last update: 2014-03-01 02:01    [W:0.160 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site