lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 5/7] ARM: at91/dt: at91sam9g45: remove useless adc properties
Date
Remove the properties that are not used anymore by the at91_adc driver.

Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index cbcc058b26b4..dc4fb7d99902 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -632,40 +632,41 @@
};

adc0: adc@fffb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
- atmel,adc-num-channels = <8>;
atmel,adc-startup-time = <40>;
- atmel,adc-channel-base = <0x30>;
- atmel,adc-drdy-mask = <0x10000>;
- atmel,adc-status-register = <0x1c>;
- atmel,adc-trigger-register = <0x08>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";

trigger@0 {
+ reg = <0>;
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger@1 {
+ reg = <1>;
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};

trigger@2 {
+ reg = <2>;
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};

trigger@3 {
+ reg = <3>;
trigger-name = "continuous";
trigger-value = <0x6>;
};
--
1.8.3.2


\
 
 \ /
  Last update: 2014-02-27 20:41    [W:0.059 / U:39.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site