lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] Documentation:add DMA support for freescale i2c driver
Date
Add i2c dts node properties for eDMA support, them depend on the eDMA driver.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
---
Documentation/devicetree/bindings/i2c/i2c-imx.txt | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index 4a8513e..52d37fd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -11,6 +11,8 @@ Required properties:
Optional properties:
- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
The absence of the propoerty indicates the default frequency 100 kHz.
+- dmas: A list of two dma specifiers, one for each entry in dma-names.
+- dma-names: should contain "tx" and "rx".

Examples:

@@ -26,3 +28,12 @@ i2c@70038000 { /* HS-I2C on i.MX51 */
interrupts = <64>;
clock-frequency = <400000>;
};
+
+i2c0: i2c@40066000 { /* i2c0 on vf610 */
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40066000 0x1000>;
+ interrupts =<0 71 0x04>;
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx","tx";
+};
--
1.8.4



\
 
 \ /
  Last update: 2014-02-27 08:41    [W:0.242 / U:2.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site