lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND V3 2/2] x86: IOSF: Change IOSF_MBI Kconfig to default y
Date
From: "David E. Box" <david.e.box@linux.intel.com>

The IOSF Mailbox interface is an access mechanism used by drivers to communicate
with the configuration registers of devices connected on the fabric of Intel SOC
platforms. The interface is ubiquitous enough that we need to ensure the
availability of the driver in non-EXPERT configured x86 kernels. Make the module
built-in so drivers can access device registers that need configuration during
early boot.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
---
arch/x86/Kconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d3b1f8b..4de5205 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2385,11 +2385,12 @@ config X86_DMA_REMAP
depends on STA2X11

config IOSF_MBI
- bool
+ bool "IOSF MBI support" if EXPERT
+ default y
depends on PCI
---help---
To be selected by modules requiring access to the Intel OnChip System
- Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms
+ Fabric (IOSF) Sideband MailBox Interface (MBI). For IOSF platforms
enumerable by PCI.

source "net/Kconfig"
--
1.7.10.4


\
 
 \ /
  Last update: 2014-02-27 18:21    [W:0.124 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site