lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: blackfin + dmaengine: conflicting define/enum "DMA_COMPLETE"
Hello,

It's good to "... matched the manual ...", and in this case we can match
the manual more pedantically, maybe with prefix "HOST".

In the case of Host DMA port STATUS register:

From manual :
.... HOST_STATUS register bits include:
• DMA Ready (DMA_RDY)
• FIFO Full (FIFOFULL)
• FIFO Empty (FIFOEMPTY)
• DMA Complete (DMA_CMPLT)
• HOSTDP Handshake (HSHK)
• HOSTDP Timeout (HOSTDP_TOUT)
• HOSTDP Interrupt Request (HIRQ).
• Allow Configurations (ALLOW_CNFG)
• DMA Direction (DMA_DIR)
• Bus Timeout Enabled (BTE)

We could change definitions to something like:

#define DMA_CMPLT 0x08 /* DMA Complete */
or
#define HOST_DMA_CMPLT 0x08 /* DMA Complete */

And make the similar for other bits/registers.

Oleks

On 01/18/2014 02:02 AM, Mike Frysinger wrote:
> On Saturday 11 January 2014 13:55:15 Marc Kleine-Budde wrote:
>> On 01/11/2014 07:31 PM, Randy Dunlap wrote:
>>> On 01/11/2014 10:09 AM, Marc Kleine-Budde wrote:
>>>> Hello,
>>>>
>>>> in current linux-next (and net-next) the compilation of the CAN
>>>>
>>>> drivers[1] with ARCH=blackfin fails with:
>>>>> CC [M] drivers/net/can/c_can/c_can.o
>>>>>
>>>>> In file included from linux/include/linux/netdevice.h:38:0,
>>>>>
>>>>> from linux/drivers/net/can/c_can/c_can.c:32:
>>>>> linux/include/linux/dmaengine.h:55:2: error: expected identifier before
>>>>> numeric constant linux/include/linux/dmaengine.h: In function
>>>>> 'dma_async_is_complete': linux/include/linux/dmaengine.h:1023:9:
>>>>> error: 'DMA_IN_PROGRESS' undeclared (first use in this function)
>>>>> linux/include/linux/dmaengine.h:1023:9: note: each undeclared
>>>>> identifier is reported only once for each function it appears in
>>>> There are two locations where DMA_COMPLETE is defined:
>>>>> arch/blackfin/mach-bf548/include/mach/defBF547.h:602:#define
>>>>> DMA_COMPLETE 0x8 /* DMA Complete */
>>>>> arch/blackfin/mach-bf548/include/mach/defBF544.h:622:#define
>>>>> DMA_COMPLETE 0x8 /* DMA Complete */
>>>> and
>>>>
>>>>> include/linux/dmaengine.h-enum dma_status {
>>>>> include/linux/dmaengine.h: DMA_COMPLETE,
>>>>> include/linux/dmaengine.h- DMA_IN_PROGRESS,
>>>>> include/linux/dmaengine.h- DMA_PAUSED,
>>>>> include/linux/dmaengine.h- DMA_ERROR,
>>>>> include/linux/dmaengine.h-};
>>>> What's the appropriate fix for the problem?
>>> arch/blackfin/mach-bf548/ needs a less generic name for its macro.
>> Mike, is there a in tree user of blacksfin's DMA_COMPLETE? I cannot find
>> anyone.
> looks like those are defines for the host port peripheral on the BF54x.
> typically for peripherals we didn't have proper drivers for (like CAN and UART
> and SPI and such), we left the defines in the headers. those in turn matched
> the manual so people coming from other Blackfin environments (and reading the
> manuals) didn't have to figure out what name the Linux headers used.
>
> unfortunately, it leads to cases like this where the names are pretty bad.
> considering the host peripheral most likely never saw any serious use, it
> should be fine to delete all the bit defines in those headers related to those
> registers (i see HOST_{STATUS,CONTROL,TIMEOUT}.
> -mike

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-27 17:41    [W:0.112 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site