lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Xen-devel] [PATCH] xen: add support for MSI message groups
On 27/02/14 15:55, Boris Ostrovsky wrote:
> On 02/26/2014 11:24 AM, Roger Pau Monne wrote:
>> Add support for MSI message groups for Xen Dom0 using the
>> MAP_PIRQ_TYPE_MULTI_MSI pirq map type.
>>
>> In order to keep track of which pirq is the first one in the group all
>> pirqs in the MSI group except for the first one have the newly
>> introduced PIRQ_MSI_GROUP flag set. This prevents calling
>> PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the
>> first pirq in the group.
>>
>> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
>> ---
>> Tested with an Intel ICH8 AHCI SATA controller.
>> ---
>> arch/x86/pci/xen.c | 29 ++++++++++++++------
>> drivers/xen/events/events_base.c | 47
>> +++++++++++++++++++++++-----------
>> drivers/xen/events/events_internal.h | 1 +
>> include/xen/events.h | 2 +-
>> include/xen/interface/physdev.h | 1 +
>> 5 files changed, 55 insertions(+), 25 deletions(-)
>>
>> diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
>> index 103e702..905956f 100644
>> --- a/arch/x86/pci/xen.c
>> +++ b/arch/x86/pci/xen.c
>> @@ -178,6 +178,7 @@ static int xen_setup_msi_irqs(struct pci_dev *dev,
>> int nvec, int type)
>> i = 0;
>> list_for_each_entry(msidesc, &dev->msi_list, list) {
>> irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i],
>> + (type == PCI_CAP_ID_MSI) ? nvec : 1,
>> (type == PCI_CAP_ID_MSIX) ?
>> "pcifront-msi-x" :
>> "pcifront-msi",
>> @@ -245,6 +246,7 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev
>> *dev, int nvec, int type)
>> "xen: msi already bound to pirq=%d\n", pirq);
>> }
>> irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq,
>> + (type == PCI_CAP_ID_MSI) ? nvec : 1,
>> (type == PCI_CAP_ID_MSIX) ?
>> "msi-x" : "msi",
>> DOMID_SELF);
>> @@ -269,9 +271,6 @@ static int xen_initdom_setup_msi_irqs(struct
>> pci_dev *dev, int nvec, int type)
>> int ret = 0;
>> struct msi_desc *msidesc;
>> - if (type == PCI_CAP_ID_MSI && nvec > 1)
>> - return 1;
>> -
>> list_for_each_entry(msidesc, &dev->msi_list, list) {
>> struct physdev_map_pirq map_irq;
>> domid_t domid;
>> @@ -291,7 +290,10 @@ static int xen_initdom_setup_msi_irqs(struct
>> pci_dev *dev, int nvec, int type)
>> (pci_domain_nr(dev->bus) << 16);
>> map_irq.devfn = dev->devfn;
>> - if (type == PCI_CAP_ID_MSIX) {
>> + if (type == PCI_CAP_ID_MSI && nvec > 1) {
>> + map_irq.type = MAP_PIRQ_TYPE_MULTI_MSI;
>> + map_irq.entry_nr = nvec;
>
>
> Are we overloading entry_nr here with a different meaning? I thought it
> was meant to be entry number (in MSI-X table for example), not number of
> entries.

In the case of MSI message groups (MAP_PIRQ_TYPE_MULTI_MSI) entry_nr is
the number of vectors to setup, so yes, it's an overloading of entry_nr.

>
>> + } else if (type == PCI_CAP_ID_MSIX) {
>> int pos;
>> u32 table_offset, bir;
>> @@ -308,6 +310,16 @@ static int xen_initdom_setup_msi_irqs(struct
>> pci_dev *dev, int nvec, int type)
>> if (pci_seg_supported)
>> ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
>> &map_irq);
>> + if (type == PCI_CAP_ID_MSI && nvec > 1 && ret) {
>> + /*
>> + * If MAP_PIRQ_TYPE_MULTI_MSI is not available
>> + * there's nothing else we can do in this case.
>> + * Just set ret > 0 so driver can retry with
>> + * single MSI.
>> + */
>> + ret = 1;
>> + goto out;
>> + }
>> if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
>> map_irq.type = MAP_PIRQ_TYPE_MSI;
>> map_irq.index = -1;
>> @@ -324,11 +336,10 @@ static int xen_initdom_setup_msi_irqs(struct
>> pci_dev *dev, int nvec, int type)
>> goto out;
>> }
>> - ret = xen_bind_pirq_msi_to_irq(dev, msidesc,
>> - map_irq.pirq,
>> - (type == PCI_CAP_ID_MSIX) ?
>> - "msi-x" : "msi",
>> - domid);
>> + ret = xen_bind_pirq_msi_to_irq(dev, msidesc, map_irq.pirq,
>> + (type == PCI_CAP_ID_MSI) ?
>> nvec : 1,
>> + (type == PCI_CAP_ID_MSIX) ?
>> "msi-x" : "msi",
>> + domid);
>> if (ret < 0)
>> goto out;
>> }
>> diff --git a/drivers/xen/events/events_base.c
>> b/drivers/xen/events/events_base.c
>> index f4a9e33..ff20ae2 100644
>> --- a/drivers/xen/events/events_base.c
>> +++ b/drivers/xen/events/events_base.c
>> @@ -391,10 +391,10 @@ static void xen_irq_init(unsigned irq)
>> list_add_tail(&info->list, &xen_irq_list_head);
>> }
>> -static int __must_check xen_allocate_irq_dynamic(void)
>> +static int __must_check xen_allocate_irqs_dynamic(int nvec)
>> {
>> int first = 0;
>> - int irq;
>> + int i, irq;
>> #ifdef CONFIG_X86_IO_APIC
>> /*
>> @@ -408,14 +408,22 @@ static int __must_check
>> xen_allocate_irq_dynamic(void)
>> first = get_nr_irqs_gsi();
>> #endif
>> - irq = irq_alloc_desc_from(first, -1);
>> + irq = irq_alloc_descs_from(first, nvec, -1);
>> - if (irq >= 0)
>> - xen_irq_init(irq);
>> + if (irq >= 0) {
>> + for (i = 0; i < nvec; i++)
>> + xen_irq_init(irq + i);
>> + }
>> return irq;
>> }
>> +static inline int __must_check xen_allocate_irq_dynamic(void)
>> +{
>> +
>> + return xen_allocate_irqs_dynamic(1);
>> +}
>> +
>> static int __must_check xen_allocate_irq_gsi(unsigned gsi)
>> {
>> int irq;
>> @@ -741,22 +749,25 @@ int xen_allocate_pirq_msi(struct pci_dev *dev,
>> struct msi_desc *msidesc)
>> }
>> int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc
>> *msidesc,
>> - int pirq, const char *name, domid_t domid)
>> + int pirq, int nvec, const char *name, domid_t domid)
>> {
>> - int irq, ret;
>> + int i, irq, ret;
>> mutex_lock(&irq_mapping_update_lock);
>> - irq = xen_allocate_irq_dynamic();
>> + irq = xen_allocate_irqs_dynamic(nvec);
>> if (irq < 0)
>> goto out;
>> - irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
>> handle_edge_irq,
>> - name);
>> + for (i = 0; i < nvec; i++) {
>> + irq_set_chip_and_handler_name(irq + i, &xen_pirq_chip,
>> handle_edge_irq, name);
>> +
>> + ret = xen_irq_info_pirq_setup(irq + i, 0, pirq + i, 0, domid,
>> + i == 0 ? 0 : PIRQ_MSI_GROUP);
>> + if (ret < 0)
>> + goto error_irq;
>> + }
>> - ret = xen_irq_info_pirq_setup(irq, 0, pirq, 0, domid, 0);
>> - if (ret < 0)
>> - goto error_irq;
>> ret = irq_set_msi_desc(irq, msidesc);
>> if (ret < 0)
>> goto error_irq;
>> @@ -764,7 +775,8 @@ out:
>> mutex_unlock(&irq_mapping_update_lock);
>> return irq;
>> error_irq:
>> - __unbind_from_irq(irq);
>> + for (; i >= 0; i--)
>> + __unbind_from_irq(irq + i);
>> mutex_unlock(&irq_mapping_update_lock);
>> return ret;
>> }
>> @@ -783,7 +795,12 @@ int xen_destroy_irq(int irq)
>> if (!desc)
>> goto out;
>> - if (xen_initial_domain()) {
>> + /*
>> + * If trying to remove a vector in a MSI group different
>> + * than the first one skip the PIRQ unmap unless this vector
>> + * is the first one in the group.
>> + */
>> + if (xen_initial_domain() && !(info->u.pirq.flags &
>> PIRQ_MSI_GROUP)) {
>> unmap_irq.pirq = info->u.pirq.pirq;
>> unmap_irq.domid = info->u.pirq.domid;
>> rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
>> diff --git a/drivers/xen/events/events_internal.h
>> b/drivers/xen/events/events_internal.h
>> index 677f41a..50c2050a 100644
>> --- a/drivers/xen/events/events_internal.h
>> +++ b/drivers/xen/events/events_internal.h
>> @@ -53,6 +53,7 @@ struct irq_info {
>> #define PIRQ_NEEDS_EOI (1 << 0)
>> #define PIRQ_SHAREABLE (1 << 1)
>> +#define PIRQ_MSI_GROUP (1 << 2)
>> struct evtchn_ops {
>> unsigned (*max_channels)(void);
>> diff --git a/include/xen/events.h b/include/xen/events.h
>> index c9c85cf..2ae7e03 100644
>> --- a/include/xen/events.h
>> +++ b/include/xen/events.h
>> @@ -102,7 +102,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
>> int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc
>> *msidesc);
>> /* Bind an PSI pirq to an irq. */
>> int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc
>> *msidesc,
>> - int pirq, const char *name, domid_t domid);
>> + int pirq, int nvec, const char *name, domid_t domid);
>> #endif
>> /* De-allocates the above mentioned physical interrupt. */
>> diff --git a/include/xen/interface/physdev.h
>> b/include/xen/interface/physdev.h
>> index 42721d1..eb13326d 100644
>> --- a/include/xen/interface/physdev.h
>> +++ b/include/xen/interface/physdev.h
>> @@ -131,6 +131,7 @@ struct physdev_irq {
>> #define MAP_PIRQ_TYPE_GSI 0x1
>> #define MAP_PIRQ_TYPE_UNKNOWN 0x2
>> #define MAP_PIRQ_TYPE_MSI_SEG 0x3
>> +#define MAP_PIRQ_TYPE_MULTI_MSI 0x4
>
> Formatting.

I don't get the formatting problem, it's the same formatting that the
other MAP_PIRQ_TYPE_* use, and if the patch is applied formatting is OK.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-27 17:21    [W:0.097 / U:32.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site