lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v0 10/15] clk: st: Adds quadfs clock binding
Date
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
.../devicetree/bindings/clock/st/st,quadfs.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/st/st,quadfs.txt

diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
new file mode 100644
index 0000000..ec86d62
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,45 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+ "st,stih416-quadfs216", "st,quadfs"
+ "st,stih416-quadfs432", "st,quadfs"
+ "st,stih416-quadfs660-E", "st,quadfs"
+ "st,stih416-quadfs660-F", "st,quadfs"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+ clock outputs but not all of them in a specific instance
+ have to be used in the SoC. If a clock name is left as
+ an empty string then no clock will be created for the
+ output associated with that string index. If fewer than
+ 4 strings are provided then no clocks will be created
+ for the remaining outputs.
+
+Example:
+
+ CLOCKGEN_E: CLOCKGEN_E {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs660-E", "st,quadfs";
+ reg = <0xfd3208bc 0xB0>;
+
+ clocks = <&CLK_SYSIN>;
+ clock-output-names = "CLK_M_PIX_MDTP_0",
+ "CLK_M_PIX_MDTP_1",
+ "CLK_M_PIX_MDTP_2",
+ "CLK_M_MPELPC";
+ };
--
1.9.0


\
 
 \ /
  Last update: 2014-02-27 17:21    [W:0.102 / U:3.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site