lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 6/9] mfd: omap-usb-tll: Update DT clock binding information
Date
The omap-usb-tll driver needs one clock for each TLL channel.
Add this information to the DT binding document.

CC: Lee Jones <lee.jones@linaro.org>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
index 62fe697..c58d704 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
@@ -7,6 +7,16 @@ Required properties:
- interrupts : should contain the TLL module's interrupt
- ti,hwmod : must contain "usb_tll_hs"

+Optional properties:
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+
+- clock-names: should include:
+ * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
+ * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
+ * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
+
Example:

usbhstll: usbhstll@4a062000 {
--
1.8.3.2


\
 
 \ /
  Last update: 2014-02-27 16:01    [W:0.176 / U:13.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site