[lkml]   [2014]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/6] ARM: rockchip: add smp functionality
This series enables the use of the additional cores on Rockchip
Cortex-A9 SoCs.

To achieve this, add the scu, the needed sram and power-management-unit.

Tested on both a BQ Curie2 (rk3066a / dual core) and
on a Radxa Rock (rk3188 / quad core).

As this version again involves bigger changes to the way reserved sram-
regions are handled, I've dropped the ACKs I had for binding and driver
changes again and therefore would be very happy if I could get new ones
if applicable (dt-maintainers and Philipp Zabel for sram.c).

changes since v7:
- move reserved sram regions to be described through subnodes, similar
to the general memory-reserve bindings, as suggested by Grant Likely.

changes since v6:
- address comments from Mark Rutland
- using of_property_read_u32_index instead of parsing the list manually
- include v4 of "of: add functions to count number of elements in a property"
to not have to count property-elements manually anymore

changes since v5:
- Grant Likely liked it better to "specify reserved regions of the
memory instead of the valid ranges", so go back to the mmio-sram-reserved
property originally suggested by Rob Herring

changes since v4:
- rebase on top of the recent rk3188 board support
- implement suggestion from Matt Sealey in moving the sram-limit from
marking reserved regions to marking available regions - hopefully
I got the usage right
- remove __CPUINIT as suggested by Fabio Estevam

changes since v3:
- address comments from Rob Herring:
- split the gathering of the reserve-data into a separate loop
- spelling and style fixes
- first patch only included for reference, already part of the
char-misc git tree

changes since v2:
- rework the sram allocation following the suggestion from Philipp Zabel

changes since v1:
- add reserved block feature for mmio-sram, to not use two logical
sram nodes
- the sram content is kept intact while the device is running, so
copying the trampoline is only needed once

Heiko Stuebner (6):
dt-bindings: sram: describe option to reserve parts of the memory
misc: sram: implement reserved sram areas
ARM: rockchip: add snoop-control-unit
ARM: rockchip: add sram dt nodes and documentation
ARM: rockchip: add power-management-unit
ARM: rockchip: add smp bringup code

.../devicetree/bindings/arm/rockchip/pmu.txt | 16 ++
.../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 ++++
Documentation/devicetree/bindings/misc/sram.txt | 33 ++++
arch/arm/boot/dts/rk3066a.dtsi | 13 ++
arch/arm/boot/dts/rk3188.dtsi | 13 ++
arch/arm/boot/dts/rk3xxx.dtsi | 10 ++
arch/arm/mach-rockchip/Kconfig | 1 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/core.h | 22 +++
arch/arm/mach-rockchip/headsmp.S | 30 ++++
arch/arm/mach-rockchip/platsmp.c | 184 +++++++++++++++++++++
arch/arm/mach-rockchip/rockchip.c | 2 +
drivers/misc/sram.c | 125 +++++++++++++-
13 files changed, 473 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu.txt
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
create mode 100644 arch/arm/mach-rockchip/core.h
create mode 100644 arch/arm/mach-rockchip/headsmp.S
create mode 100644 arch/arm/mach-rockchip/platsmp.c


 \ /
  Last update: 2014-02-26 10:01    [W:0.073 / U:7.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site