lkml.org 
[lkml]   [2014]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 10/11] ARM: shmobile: koelsch dts: Add MSIOF nodes
Date
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add pinctrl and SPI device for MSIOF on Koelsch.
On this board, only MSIOF0 is in use. Its bus contains a single device
(a Renesas R2A11302FT PMIC), for which no bindings are defined yet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: devicetree@vger.kernel.org
---
v2:
- No changes

arch/arm/boot/dts/r8a7791-koelsch.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 03508cc73e8b..f3eb83c4265d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -161,6 +161,12 @@
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
};
+
+ msiof0_pins: spi1 {
+ renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+ "msiof0_tx";
+ renesas,function = "msiof0";
+ };
};

&ether {
@@ -212,3 +218,18 @@
};
};
};
+
+&msiof0 {
+ pinctrl-0 = <&msiof0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ pmic: pmic@0 {
+ compatible = "renesas,r2a11302ft";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-25 12:21    [W:0.178 / U:2.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site