lkml.org 
[lkml]   [2014]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] spi: sh-msiof: Add support for R-Car H2 and M2
Date

Hi Mark,

This patch series refactors the sh-msiof SPI driver and adds support for
the MSIOF variant in the Renesas R-Car H2 (r8a7790) and M2 (r8a7791) SoCs.

It was tested on the Lager and Koelsch development boards, using a dummy
driver for the Renesas r2a11302ft PMIC that reads out the PMIC's version ID.

[1/6] spi: sh-msiof: Improve bindings
[2/6] spi: sh-msiof: Move default FIFO sizes to device ID data
[3/6] spi: sh-msiof: Add support for R-Car H2 and M2
[4/6] spi: sh-msiof: Move clock management to (un)prepare_message()
[5/6] spi: sh-msiof: Convert to let spi core validate xfer->bits_per_word
[6/6] spi: sh-msiof: Use core message handling instead of spi-bitbang

These are (reworked versions of) the remaining patches not taken from v1.
Changelogs are available in the individual patches.

Some of this work was based on a patch series by Takashi Yoshii
<takasi-y@ops.dti.ne.jp>.

Thanks!

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds


\
 
 \ /
  Last update: 2014-02-25 12:01    [W:0.102 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site