lkml.org 
[lkml]   [2014]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PWC webcam and setpwc tool no longer working with 3.12.11 kernel
On Friday, 21 February 2014, 9:47, Hans de Goede <hdegoede@redhat.com> wrote:

> This is likely caused by the camera being plugged into a usb-bus which already is used
> by other reserved-bandwidth devices such as mice, keyboard, usb soundcards, etc.

> If possible USB-3 ports are preferred over USB-2 ports or connecting through an USB-2
> hub. USB-2's USB-1 emulation has some issues, which means we cannot use full USB-1 bandwidth
> there.

Hi,

Yes, it turns out that every device plugged into one of the USB2 ports on the back of this PC ends up on the same USB2 hub. Moving the PWC device to one of the USB3 ports instead allows it to work, although it seems like a shocking waste of a USB3 port - this being an old USB1 webcam!

And v4l2-ctl seem to recognise it as well:

$ v4l2-ctl --info
Driver Info (not using libv4l2):
    Driver name   : pwc
    Card type     : Logitech QuickCam Zoom
    Bus info      : usb-0000:05:00.0-2
    Driver version: 3.12.11
    Capabilities  : 0x85000001
        Video Capture
        Read/Write
        Streaming
        Device Capabilities
    Device Caps   : 0x05000001
        Video Capture
        Read/Write
        Streaming

Cheers,
Chris

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-21 16:41    [W:0.062 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site