lkml.org 
[lkml]   [2014]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 12/22] lpfc: Use pci_enable_msix_range()
From
Date
Alexander,

I've reworked this patch to layer on top of our rev 8.3.45 patches
that were just posted to linux-scsi. There were some conflicts due to
new additions. Additionally, there were two other uses of pci_enable_msiXXX
that needed to be addressed. The changes in this patch also address the
change requested by:
"[PATCH 11/22] lpfc: Remove superfluous call to pci_disable_msix()"

To avoid creating merge conflicts - either by your patches going in then
scsi git tree trying to merge or by scsi git tree going in and your patches
trying to merge - I recommend that you eliminate your lpfc patches from the
kernel and apply the patch below once scsi git with the updated lpfc driver
has actually merged.

-- james s


Revised patch:



As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

CC: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-pci@vger.kernel.org



Signed-off-by: James Smart <james.smart@emulex.com>

---

lpfc_init.c | 43 ++++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 21 deletions(-)


diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2014-02-19 16:23:07.260097013 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2014-02-20 11:39:20.348203354 -0500
@@ -8100,8 +8100,8 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
- * with SLI-3 interface specs. The kernel function pci_enable_msix() is
- * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * with SLI-3 interface specs. The kernel function pci_enable_msix_range() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix_range(), once
* invoked, enables either all or nothing, depending on the current
* availability of PCI vector resources. The device driver is responsible
* for calling the individual request_irq() to register each MSI-X vector
@@ -8126,12 +8126,12 @@ lpfc_sli_enable_msix(struct lpfc_hba *ph
phba->msix_entries[i].entry = i;

/* Configure MSI-X capability structure */
- rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
- ARRAY_SIZE(phba->msix_entries));
- if (rc) {
+ rc = pci_enable_msix_range(phba->pcidev, phba->msix_entries,
+ LPFC_MSIX_VECTORS, LPFC_MSIX_VECTORS);
+ if (rc < 0) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
- goto msi_fail_out;
+ goto vec_fail_out;
}
for (i = 0; i < LPFC_MSIX_VECTORS; i++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -8209,6 +8209,8 @@ irq_fail_out:
msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
+
+vec_fail_out:
return rc;
}

@@ -8238,8 +8240,8 @@ lpfc_sli_disable_msix(struct lpfc_hba *p
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode to device with
- * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
- * enable the MSI vector. The device driver is responsible for calling the
+ * SLI-3 interface spec. The kernel function pci_enable_msi_range() is called
+ * to enable the MSI vector. The device driver is responsible for calling the
* request_irq() to register MSI vector with a interrupt the handler, which
* is done in this function.
*
@@ -8252,8 +8254,8 @@ lpfc_sli_enable_msi(struct lpfc_hba *phb
{
int rc;

- rc = pci_enable_msi(phba->pcidev);
- if (!rc)
+ rc = pci_enable_msi_range(phba->pcidev, 1, 1);
+ if (rc > 0)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0462 PCI enable MSI mode success.\n");
else {
@@ -8692,17 +8694,15 @@ lpfc_sli4_enable_msix(struct lpfc_hba *p
phba->sli4_hba.msix_entries[index].entry = index;
vectors++;
}
-enable_msix_vectors:
- rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
- vectors);
- if (rc > 1) {
- vectors = rc;
- goto enable_msix_vectors;
- } else if (rc) {
+
+ rc = pci_enable_msix_range(phba->pcidev, phba->sli4_hba.msix_entries,
+ 2, vectors);
+ if (rc < 0) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
}
+ vectors = rc;

/* Log MSI-X vector assignment */
for (index = 0; index < vectors; index++)
@@ -8764,9 +8764,10 @@ cfg_fail_out:
&phba->sli4_hba.fcp_eq_hdl[index]);
}

-msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
+
+msi_fail_out:
return rc;
}

@@ -8804,7 +8805,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode to device with
- * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * SLI-4 interface spec. The kernel function pci_enable_msi_range() is called
* to enable the MSI vector. The device driver is responsible for calling
* the request_irq() to register MSI vector with a interrupt the handler,
* which is done in this function.
@@ -8818,8 +8819,8 @@ lpfc_sli4_enable_msi(struct lpfc_hba *ph
{
int rc, index;

- rc = pci_enable_msi(phba->pcidev);
- if (!rc)
+ rc = pci_enable_msi_range(phba->pcidev, 1, 1);
+ if (rc > 0)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0487 PCI enable MSI mode success.\n");
else {



\
 
 \ /
  Last update: 2014-02-20 18:21    [W:0.885 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site