lkml.org 
[lkml]   [2014]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 3/3] sh: Remove Kconfig entries for TMU, CMT and MTU2
Date
From: Magnus Damm <damm@opensource.se>

Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU and MTU2
it is safe to remove these from SH.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
[wsa: rebased to timers/core]
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
---
arch/sh/Kconfig | 76 +++++++++++++++++----------------------------------------
1 file changed, 23 insertions(+), 53 deletions(-)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6357710..364d204 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -123,15 +123,6 @@ config SYS_SUPPORTS_NUMA
config SYS_SUPPORTS_PCI
bool

-config SYS_SUPPORTS_CMT
- bool
-
-config SYS_SUPPORTS_MTU2
- bool
-
-config SYS_SUPPORTS_TMU
- bool
-
config STACKTRACE_SUPPORT
def_bool y

@@ -191,14 +182,14 @@ config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU

config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU

config CPU_SH4A
@@ -213,7 +204,7 @@ config CPU_SH4AL_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU

config CPU_SHX2
@@ -250,7 +241,7 @@ choice
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT

# SH-2A Processor Support

@@ -258,50 +249,50 @@ config CPU_SUBTYPE_SH7201
bool "Support SH7201 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2

config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL

config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2

config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2

config CPU_SUBTYPE_SH7264
bool "Support SH7264 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL

config CPU_SUBTYPE_SH7269
bool "Support SH7269 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL

config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2
help
Select MX-G if running on an R8A03022BG part.

@@ -354,7 +345,7 @@ config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
@@ -366,7 +357,7 @@ config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
help
@@ -422,7 +413,7 @@ config CPU_SUBTYPE_SH7723
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -434,7 +425,7 @@ config CPU_SUBTYPE_SH7724
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -514,7 +505,7 @@ config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
select ARCH_SHMOBILE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT

config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
@@ -523,7 +514,7 @@ config CPU_SUBTYPE_SH7722
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL

@@ -534,7 +525,7 @@ config CPU_SUBTYPE_SH7366
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT

endchoice

@@ -567,27 +558,6 @@ source "arch/sh/boards/Kconfig"

menu "Timer and clock configuration"

-config SH_TIMER_TMU
- bool "TMU timer driver"
- depends on SYS_SUPPORTS_TMU
- default y
- help
- This enables the build of the TMU timer driver.
-
-config SH_TIMER_CMT
- bool "CMT timer driver"
- depends on SYS_SUPPORTS_CMT
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_MTU2
- bool "MTU2 timer driver"
- depends on SYS_SUPPORTS_MTU2
- default y
- help
- This enables build of the MTU2 timer driver.
-
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
depends on SH_CLK_CPG_LEGACY
--
1.8.5.1


\
 
 \ /
  Last update: 2014-02-20 13:41    [W:0.095 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site