lkml.org 
[lkml]   [2014]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/12] clk: bcm281xx: define a bus clock
Date
Define the bus clock "bsc3_apb".  This bus clock has to be managed
using the CCU policy mechanism, so add the definitions required for
that to the clock and its CCU.

This one bus clock in particular is defined because it is needed
by peripheral clock "bsc3". Our boot loader does not properly
activate "bsc3_apb", and as a result, "bsc3" isn't able to function
properly. With "bsc3_apb" specified as a prerequisite clock for
"bsc3", the latter works correctly.

For now only this one bus clock is defined, because it allows
correct operation of "bsc3". Others can be added later as needed
(and this patch serves to show how that's done).

Signed-off-by: Alex Elder <elder@linaro.org>
---
arch/arm/boot/dts/bcm11351.dtsi | 3 ++-
drivers/clk/bcm/clk-bcm281xx.c | 13 ++++++++++++-
include/dt-bindings/clock/bcm281xx.h | 3 ++-
3 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 94b36f6..ff56891 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -247,7 +247,8 @@
"bsc1",
"bsc2",
"bsc3",
- "pwm";
+ "pwm",
+ "bsc3_apb";
};

ref_1m_clk: ref_1m {
diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
index 43fa0b6..40ed2c1 100644
--- a/drivers/clk/bcm/clk-bcm281xx.c
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -321,8 +321,17 @@ static struct peri_clk_data pwm_data = {
.trig = TRIGGER(0x0afc, 15),
};

+static struct bus_clk_data bsc3_apb_data = {
+ .policy = POLICY(0x0048, 4),
+ .gate = HW_SW_GATE(0x0484, 16, 0, 1),
+};
+
static struct ccu_data slave_ccu_data = {
BCM281XX_CCU_COMMON(slave, SLAVE),
+ .policy = {
+ .enable = CCU_LVM_EN(0x0034, 0),
+ .control = CCU_POLICY_CTL(0x000c, 0, 1, 2),
+ },
.kona_clks = {
[BCM281XX_SLAVE_CCU_UARTB] =
KONA_CLK(slave, uartb, peri),
@@ -341,9 +350,11 @@ static struct ccu_data slave_ccu_data = {
[BCM281XX_SLAVE_CCU_BSC2] =
KONA_CLK(slave, bsc2, peri),
[BCM281XX_SLAVE_CCU_BSC3] =
- KONA_CLK(slave, bsc3, peri),
+ KONA_CLK_PREREQ(slave, bsc3, peri, bsc3_apb),
[BCM281XX_SLAVE_CCU_PWM] =
KONA_CLK(slave, pwm, peri),
+ [BCM281XX_SLAVE_CCU_BSC3_APB] =
+ KONA_CLK(slave, bsc3_apb, bus),
[BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
},
};
diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h
index e009694..57591b1 100644
--- a/include/dt-bindings/clock/bcm281xx.h
+++ b/include/dt-bindings/clock/bcm281xx.h
@@ -60,6 +60,7 @@
#define BCM281XX_SLAVE_CCU_BSC2 7
#define BCM281XX_SLAVE_CCU_BSC3 8
#define BCM281XX_SLAVE_CCU_PWM 9
-#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 10
+#define BCM281XX_SLAVE_CCU_BSC3_APB 10
+#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 11

#endif /* _CLOCK_BCM281XX_H */
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-20 02:01    [W:0.056 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site