Messages in this thread | | | Date | Wed, 19 Feb 2014 17:54:09 +0000 | From | Mark Rutland <> | Subject | Re: [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support |
| |
On Wed, Feb 19, 2014 at 05:31:42PM +0000, Alexandre Belloni wrote: > On 19/02/2014 at 17:00:20 +0000, Mark Rutland wrote : > > On Wed, Feb 19, 2014 at 03:32:24PM +0000, Alexandre Belloni wrote: > > > This adds preliminary DT support for the at91sam9rl. > > > > > > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > > > --- > > > arch/arm/boot/dts/at91sam9rl.dtsi | 628 ++++++++++++++++++++++++++++++++++++++ > > > arch/arm/mach-at91/at91sam9rl.c | 16 + > > > 2 files changed, 644 insertions(+) > > > create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi > > > > [...] > > > > > + tcb0: timer@fffa0000 { > > > + compatible = "atmel,at91rm9200-tcb"; > > > + reg = <0xfffa0000 0x100>; > > > + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0 > > > + 17 IRQ_TYPE_LEVEL_HIGH 0 > > > + 18 IRQ_TYPE_LEVEL_HIGH 0>; > > > + }; > > > > Nit: please bracket list entries individually. Also for other list > > properties like reg and (*-)gpio(s). > > > > OK. > > > [...] > > > > > + adc0: adc@fffd0000 { > > > + compatible = "atmel,at91sam9260-adc"; > > > + reg = <0xfffd0000 0x100>; > > > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; > > > + atmel,adc-use-external-triggers; > > > + atmel,adc-channels-used = <0xf>; > > > + atmel,adc-vref = <3300>; > > > + atmel,adc-num-channels = <4>; > > > + atmel,adc-startup-time = <15>; > > > + atmel,adc-channel-base = <0x30>; > > > + atmel,adc-drdy-mask = <0x10000>; > > > + atmel,adc-status-register = <0x1c>; > > > + atmel,adc-trigger-register = <0x04>; > > > + atmel,adc-res = <8 10>; > > > + atmel,adc-res-names = "lowres", "highres"; > > > + atmel,adc-use-res = "highres"; > > > + > > > + trigger@0 { > > > + trigger-name = "timer-counter-0"; > > > + trigger-value = <0x1>; > > > + }; > > > > A unit-address should go with a reg value. Either this needs a reg and > > the parent node needs #address-cells and #size-cells, or the > > unit-address should go, and the names made unique through other means. > > > > OK, I guess I'll have to fix > Documentation/devicetree/bindings/arm/atmel-adc.txt too.
Yes please.
> > > [...] > > > > > + pinctrl@fffff400 { > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; > > > > NAK. Either this is a atmel,at91rm9200-pinctrl node or a simple-bus. Not > > both; that doesn't make any sense. > > > > Simply a copy paste, I'll fix that here and also the 6 other atmel > dtsi includes. > > What is your preference for those using: > compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ?
A node should by either a bus or a pinctrl node.
If it has chidren then the simple-bus should be separated out into a separate node. If there are no children simple-bus should go.
Cheers, Mark.
| |