lkml.org 
[lkml]   [2014]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] cpufreq, powernow-k8: Initialize per-cpu data-structures properly
Date
On Monday, February 17, 2014 04:35:08 PM Viresh Kumar wrote:
> On 17 February 2014 16:18, Srivatsa S. Bhat
> <srivatsa.bhat@linux.vnet.ibm.com> wrote:
> > The powernow-k8 driver maintains a per-cpu data-structure called powernow_data
> > that is used to perform the frequency transitions. It initializes this data-
> > structure only for the policy->cpu. So, accesses to this data-structure by
> > other CPUs results in various problems because they would have been
> > uninitialized.
> >
> > Specifically, if a cpu (!= policy->cpu) invokes the drivers' ->get() function,
> > it returns 0 as the KHz value, since its per-cpu memory doesn't point to
> > anything valid. This causes problems during suspend/resume since
> > cpufreq_update_policy() tries to enforce this (0 KHz) as the current frequency
> > of the CPU, and this madness gets propagated to adjust_jiffies() as well.
> > Eventually, lots of things start breaking down, including the r8169 ethernet
> > card, in one particularly interesting case reported by Pierre Ossman.
> >
> > https://bugzilla.kernel.org/show_bug.cgi?id=70311
> >
> > Fix this by initializing the per-cpu data-structures of _all_ the CPUs
> > in the policy appropriately.
> >
> > Cc: stable@vger.kernel.org
> > Reported-by: Pierre Ossman <pierre@ossman.eu>
> > Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
> > ---
> >
> > drivers/cpufreq/powernow-k8.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
> > index e10b646..6684e03 100644
> > --- a/drivers/cpufreq/powernow-k8.c
> > +++ b/drivers/cpufreq/powernow-k8.c
> > @@ -1076,7 +1076,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol)
> > {
> > struct powernow_k8_data *data;
> > struct init_on_cpu init_on_cpu;
> > - int rc;
> > + int rc, cpu;
> >
> > smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
> > if (rc)
> > @@ -1140,7 +1140,9 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol)
> > pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
> > data->currfid, data->currvid);
> >
> > - per_cpu(powernow_data, pol->cpu) = data;
> > + /* Point all the CPUs in this policy to the same data */
> > + for_each_cpu(cpu, pol->cpus)
> > + per_cpu(powernow_data, cpu) = data;
> >
> > return 0;
> >
> > @@ -1155,6 +1157,7 @@ err_out:
> > static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
> > {
> > struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
> > + int cpu;
> >
> > if (!data)
> > return -EINVAL;
> > @@ -1165,7 +1168,8 @@ static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
> >
> > kfree(data->powernow_table);
> > kfree(data);
> > - per_cpu(powernow_data, pol->cpu) = NULL;
> > + for_each_cpu(cpu, pol->cpus)
> > + per_cpu(powernow_data, cpu) = NULL;
> >
> > return 0;
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Queued up as a fix for 3.14, thanks!

--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2014-02-17 23:22    [W:0.038 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site