lkml.org 
[lkml]   [2014]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] Staging: comedi: addi-data: cleanup comments in hwdrv_apci035.c
On 2014-02-16 08:41, Chase Southwood wrote:
> This patch for hwdrv_apci035.c aligns comment blocks and makes indentation
> of comments consistent. Removed all "spaces before tabs" in comment
> indentation as well.
>
> Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
> ---
> .../comedi/drivers/addi-data/hwdrv_apci035.c | 140 ++++++++++-----------
> 1 file changed, 70 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
> index 584a1d5..90d5801 100644
> --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
> +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
> @@ -188,17 +188,17 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> -/************************/
> -/* Set the reload value */
> -/************************/
> + /************************/
> + /* Set the reload value */
> + /************************/
> outl(data[3], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 4);
> -/*********************/
> -/* Set the time unit */
> -/*********************/
> + /*********************/
> + /* Set the time unit */
> + /*********************/
> outl(data[2], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 8);
> if (data[0] == ADDIDATA_TIMER) {
>
> - /******************************/
> + /******************************/
> /* Set the mode : */
> /* - Disable the hardware */
> /* - Disable the counter mode */
> @@ -206,7 +206,7 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
> /* - Disable the reset */
> /* - Enable the timer mode */
> /* - Set the timer mode */
> - /******************************/
> + /******************************/
>
> ui_Command =
> (ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
> @@ -215,14 +215,14 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
> else {
> if (data[0] == ADDIDATA_WATCHDOG) {
>
> - /******************************/
> + /******************************/
> /* Set the mode : */
> /* - Disable the hardware */
> /* - Disable the counter mode */
> /* - Disable the warning */
> /* - Disable the reset */
> /* - Disable the timer mode */
> - /******************************/
> + /******************************/
>
> ui_Command = ui_Command & 0xFFF819E2UL;
>
> @@ -234,73 +234,73 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> -/********************************/
> -/* Disable the hardware trigger */
> -/********************************/
> + /********************************/
> + /* Disable the hardware trigger */
> + /********************************/
> ui_Command = ui_Command & 0xFFFFF89FUL;
> if (data[4] == ADDIDATA_ENABLE) {
> - /**********************************/
> + /**********************************/
> /* Set the hardware trigger level */
> - /**********************************/
> + /**********************************/
> ui_Command = ui_Command | (data[5] << 5);
> }
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> -/*****************************/
> -/* Disable the hardware gate */
> -/*****************************/
> + /*****************************/
> + /* Disable the hardware gate */
> + /*****************************/
> ui_Command = ui_Command & 0xFFFFF87FUL;
> if (data[6] == ADDIDATA_ENABLE) {
> -/*******************************/
> -/* Set the hardware gate level */
> -/*******************************/
> + /*******************************/
> + /* Set the hardware gate level */
> + /*******************************/
> ui_Command = ui_Command | (data[7] << 7);
> }
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> -/*******************************/
> -/* Disable the hardware output */
> -/*******************************/
> + /*******************************/
> + /* Disable the hardware output */
> + /*******************************/
> ui_Command = ui_Command & 0xFFFFF9FBUL;
> -/*********************************/
> -/* Set the hardware output level */
> -/*********************************/
> + /*********************************/
> + /* Set the hardware output level */
> + /*********************************/
> ui_Command = ui_Command | (data[8] << 2);
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> if (data[9] == ADDIDATA_ENABLE) {
> - /************************/
> + /************************/
> /* Set the reload value */
> - /************************/
> + /************************/
> outl(data[11],
> devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 24);
> - /**********************/
> + /**********************/
> /* Set the time unite */
> - /**********************/
> + /**********************/
> outl(data[10],
> devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 28);
> }
>
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> - /*******************************/
> + /*******************************/
> /* Disable the hardware output */
> - /*******************************/
> + /*******************************/
> ui_Command = ui_Command & 0xFFFFF9F7UL;
> - /*********************************/
> + /*********************************/
> /* Set the hardware output level */
> - /*********************************/
> + /*********************************/
> ui_Command = ui_Command | (data[12] << 3);
> outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> - /*************************************/
> - /** Enable the watchdog interrupt **/
> - /*************************************/
> + /*************************************/
> + /** Enable the watchdog interrupt **/
> + /*************************************/
> ui_Command = 0;
> ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> -/*******************************/
> -/* Set the interrupt selection */
> -/*******************************/
> + /*******************************/
> + /* Set the interrupt selection */
> + /*******************************/
> ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
>
> ui_Command = (ui_Command & 0xFFFFF9FDUL) | (data[13] << 1);
> @@ -348,9 +348,9 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
> if (data[0] == 1) {
> ui_Command =
> inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> - /**********************/
> + /**********************/
> /* Start the hardware */
> - /**********************/
> + /**********************/
> ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL;
> outl(ui_Command,
> devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> @@ -358,9 +358,9 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
> if (data[0] == 2) {
> ui_Command =
> inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> - /***************************/
> + /***************************/
> /* Set the trigger command */
> - /***************************/
> + /***************************/
> ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x200UL;
> outl(ui_Command,
> devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> @@ -369,10 +369,10 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
> if (data[0] == 0) {
> /* Stop The Watchdog */
> ui_Command = 0;
> -/*
> -* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
> -* ui_Command = ui_Command & 0xFFFFF9FEUL;
> -*/
> + /*
> + * ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
> + * ui_Command = ui_Command & 0xFFFFF9FEUL;
> + */
> outl(ui_Command,
> devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
> } /* if (data[1]==0) */
> @@ -525,9 +525,9 @@ static int i_APCI035_ConfigAnalogInput(struct comedi_device *dev,
> devpriv->tsk_Current = current;
> outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
> outl(0, devpriv->iobase + 128 + 0);
> -/********************************/
> -/* Initialise the warning value */
> -/********************************/
> + /********************************/
> + /* Initialise the warning value */
> + /********************************/
> outl(0x300 | 0, devpriv->iobase + 128 + 0x4);
> outl((data[0] << 8), devpriv->iobase + 128 + 0);
> outl(0x200000UL, devpriv->iobase + 128 + 12);
> @@ -564,18 +564,18 @@ static int i_APCI035_ReadAnalogInput(struct comedi_device *dev,
> struct addi_private *devpriv = dev->private;
> unsigned int ui_CommandRegister = 0;
>
> -/******************/
> -/* Set the start */
> -/******************/
> + /******************/
> + /* Set the start */
> + /******************/
> ui_CommandRegister = 0x80000;
> - /******************************/
> + /******************************/
> /* Write the command register */
> - /******************************/
> + /******************************/
> outl(ui_CommandRegister, devpriv->iobase + 128 + 8);
>
> -/***************************************/
> -/* Read the digital value of the input */
> -/***************************************/
> + /***************************************/
> + /* Read the digital value of the input */
> + /***************************************/
> data[0] = inl(devpriv->iobase + 128 + 28);
> return insn->n;
> }
> @@ -640,32 +640,32 @@ static void v_APCI035_Interrupt(int irq, void *d)
> i_WatchdogNbr = i_Flag;
> i_Flag = i_Flag + 1;
> }
> - /**************************************/
> + /**************************************/
> /* Read the interrupt status register of temperature Warning */
> - /**************************************/
> + /**************************************/
> ui_StatusRegister1 = inl(devpriv->iobase + 128 + 16);
> - /**************************************/
> + /**************************************/
> /* Read the interrupt status register for Watchdog/timer */
> - /**************************************/
> + /**************************************/
>
> ui_StatusRegister2 =
> inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20);
>
> /* Test if warning relay interrupt */
> if ((((ui_StatusRegister1) & 0x8) == 0x8)) {
> - /**********************************/
> + /**********************************/
> /* Disable the temperature warning */
> - /**********************************/
> + /**********************************/
> ui_ReadCommand = inl(devpriv->iobase + 128 + 12);
> ui_ReadCommand = ui_ReadCommand & 0xFFDF0000UL;
> outl(ui_ReadCommand, devpriv->iobase + 128 + 12);
> - /***************************/
> + /***************************/
> /* Read the channel number */
> - /***************************/
> + /***************************/
> ui_ChannelNumber = inl(devpriv->iobase + 128 + 60);
> - /**************************************/
> + /**************************************/
> /* Read the digital temperature value */
> - /**************************************/
> + /**************************************/
> ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
> send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
> } /* if (((ui_StatusRegister1 & 0x8) == 0x8)) */
>

Looks good.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>

--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-


\
 
 \ /
  Last update: 2014-02-17 17:21    [W:0.124 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site