lkml.org 
[lkml]   [2014]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/6] ARM: dts: AM33XX: Add ecap interrupt properties
On 05/02/14 19:01, Matt Porter wrote:
> Add missing interrupt properties to the ecap0, ecap1, and ecap2
> nodes.
>
> Signed-off-by: Matt Porter <mporter@linaro.org>
This one is unconnected from the rest of the series really so should go
into the relevant arch tree whenever it make sense.

Jonathan
> ---
> arch/arm/boot/dts/am33xx.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 6d95d3d..b4139ba 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -582,6 +582,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48300100 0x80>;
> + interrupts = <31>;
> + interrupt-names = "ecap0";
> ti,hwmods = "ecap0";
> status = "disabled";
> };
> @@ -610,6 +612,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48302100 0x80>;
> + interrupts = <47>;
> + interrupt-names = "ecap1";
> ti,hwmods = "ecap1";
> status = "disabled";
> };
> @@ -638,6 +642,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48304100 0x80>;
> + interrupts = <61>;
> + interrupt-names = "ecap2";
> ti,hwmods = "ecap2";
> status = "disabled";
> };
>



\
 
 \ /
  Last update: 2014-02-15 13:21    [W:0.146 / U:8.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site