lkml.org 
[lkml]   [2014]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] pciehp: Display the link state change reporting capability
On Fri, Feb 14, 2014 at 2:26 PM, Rajat Jain <rajatxjain@gmail.com> wrote:
> With recent addition of Link state change based hot-plug, it makes
> sense to display this capability in dbg_ctrl() addition to others.
>
> (Also move the call to dbg_ctrl() further down untill after the value
> is populated in ctrl->link_active_reporting)
>
> Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
> Signed-off-by: Rajat Jain <rajatjain@juniper.net>
> Signed-off-by: Guenter Roeck <groeck@juniper.net>

This is fine as it is, but I'd like to get rid of dbg_ctrl()
altogether someday. I made pcie_init() more verbose with afe2478f2e3f
("PCI: pciehp: Announce slot capabilities (slot #, button, LEDs,
etc)"), and it does include the PCI_EXP_LNKCAP_DLLLARC info.

Is there anything important left in dbg_ctrl() that we don't already
print elsewhere? The PCI core prints the vendor/device and BAR info.
Of course, we don't print the entire capabilities/status/control words
anywhere else. Is that important?

> ---
> drivers/pci/hotplug/pciehp_hpc.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index da4b020..cbe8e924 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -747,6 +747,8 @@ static inline void dbg_ctrl(struct controller *ctrl)
> EMI(ctrl) ? "yes" : "no");
> ctrl_info(ctrl, " Command Completed : %3s\n",
> NO_CMD_CMPL(ctrl) ? "no" : "yes");
> + ctrl_info(ctrl, " Link Change Reporting: %3s\n",
> + ctrl->link_active_reporting ? "yes" : "no");
> pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &reg16);
> ctrl_info(ctrl, "Slot Status : 0x%04x\n", reg16);
> pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &reg16);
> @@ -771,7 +773,6 @@ struct controller *pcie_init(struct pcie_device *dev)
> ctrl->slot_cap = slot_cap;
> mutex_init(&ctrl->ctrl_lock);
> init_waitqueue_head(&ctrl->queue);
> - dbg_ctrl(ctrl);
> /*
> * Controller doesn't notify of command completion if the "No
> * Command Completed Support" bit is set in Slot Capability
> @@ -784,10 +785,9 @@ struct controller *pcie_init(struct pcie_device *dev)
>
> /* Check if Data Link Layer Link Active Reporting is implemented */
> pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
> - if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {
> - ctrl_dbg(ctrl, "Link Active Reporting supported\n");
> + if (link_cap & PCI_EXP_LNKCAP_DLLLARC)
> ctrl->link_active_reporting = 1;
> - }
> + dbg_ctrl(ctrl);
>
> /* Clear all remaining event bits in Slot Status register */
> pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2014-02-14 23:21    [W:0.043 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site