lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/1] Micrel PHY: Allow setting of config flag MICREL_PHY_50MHZ_CLK for KSZ8081/KSZ8091 PHY
From
From: Waibel Georg <Georg.Waibel@sensor-technik.de>
Date: Tue, 11 Feb 2014 08:28:50 +0000

> From fe6aad7bb4c61b3ccd14bf637025e87df05ca14c Mon Sep 17 00:00:00 2001
> From: Georg Waibel <georg.waibel@sensor-technik.de>
> Date: Tue, 11 Feb 2014 08:15:56 +0100
> Subject: [PATCH 1/1] Micrel PHY: Allow setting of config flag MICREL_PHY_50MHZ_CLK for KSZ8081/KSZ8091 PHY
>
> The Micrel KSZ8081 and KSZ8091 PHYs support the RMII 50MHz mode. In this
> mode, the PHY can be driven by an external 50MHz clock source. This mode
> can be selected by the PHY device flag MICREL_PHY_50MHZ_CLK.
> The driver already supports this feature for the KSZ8051 PHY. Thus, the
> config_init function of this device can be used for the KSZ8081/8091 PHY
> too.
>
> Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>

The only thing in the entire tree which sets MICREL_PHY_50MHZ_CLK is
the apx4devkit_phy_fixup() in arch/arm/mach-mxs/mach-mxs.c, and it
is doing so for an 8051 PHY device.

If you plan to submit a patch which will set this flag in some other
situation, you can submit this patch at the same time.


\
 
 \ /
  Last update: 2014-02-13 22:41    [W:0.092 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site