lkml.org 
[lkml]   [2014]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] mmc: Add realtek USB sdmmc host driver
On 02/10/2014 10:58 PM, Ulf Hansson wrote:
> On 6 February 2014 15:35, <rogerable@realtek.com> wrote:
>> From: Roger Tseng <rogerable@realtek.com>
>>
>> Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
>> USB card reader MFD driver.
>>
>> Signed-off-by: Roger Tseng <rogerable@realtek.com>
>> ---
>> drivers/mmc/host/Kconfig | 7 +
>> drivers/mmc/host/Makefile | 1 +
>> drivers/mmc/host/rtsx_usb_sdmmc.c | 1500 +++++++++++++++++++++++++++++++++++++
>> 3 files changed, 1508 insertions(+)
>> create mode 100644 drivers/mmc/host/rtsx_usb_sdmmc.c
[snip]
>> +#ifdef CONFIG_PM_RUNTIME
>
> There are stubs for pm_runtime* functions, thus the ifdefs can be removed.
> Please go though the complete patch and remove all instances.
>
>> + pm_runtime_put(sdmmc_dev(host));
>
> I don't know so much about USB mmc hosts hardware, but I just wanted
> to find out if I have understood this correct.
>
> You can't do fine grained power management of the USB parent device,
> since it needs to be runtime resumed to be able keep the power the
> card? Once it becomes runtime suspended, the power to the card will
> thus also be dropped?
>
Yes, and to keep some internal state of the controller.

[snip]
>> +#ifdef CONFIG_PM
>
> I suppose this should be CONFIG_PM_SLEEP?
>
...
>> + err = mmc_suspend_host(mmc);
>
> This won't compile. The mmc_suspend_host API has been removed.
>
...
>> + return mmc_resume_host(mmc);
>
> This won't compile. The mmc_resume_host API has been removed.
>
...
>> +static struct platform_driver rtsx_usb_sdmmc_driver = {
>> + .probe = rtsx_usb_sdmmc_drv_probe,
>> + .remove = rtsx_usb_sdmmc_drv_remove,
>> + .id_table = rtsx_usb_sdmmc_ids,
>> + .suspend = rtsx_usb_sdmmc_suspend,
>> + .resume = rtsx_usb_sdmmc_resume,
>
> Please use the modern pm_ops instead of the legacy suspend/resume callbacks.
> I suggest you then also switch to use the SIMPLE_DEV_PM_OPS macro.

I just missed the removal of mmc_suspend|resume_host.

I'll remove all these unnecessary mmc host pm things as done in commit
ff71c4bcb0af2730d047989e485303ae4e1ce794 for drivers of our PCIe devices.

Thanks for pointing this out.

> Kind regards
> Ulf Hansson


\
 
 \ /
  Last update: 2014-02-14 20:01    [W:0.082 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site