lkml.org 
[lkml]   [2014]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: da9052-regulator fails to probe in linux-next
From
Hi Mark,

On Tue, Dec 9, 2014 at 7:27 PM, Mark Brown <broonie@kernel.org> wrote:
> On Tue, Dec 09, 2014 at 07:17:14PM -0200, Fabio Estevam wrote:
>
>> Seem like this issue is not specific to the da9052 regulator.
>
>> On a imx6q-wandboard we can see the internal anatop regulators being
>> probed on linux-next 20141031:
>> http://arm-soc.lixom.net/bootlogs/next/next-20141031/wandboard-arm-imx_v6_v7_defconfig.html
>>
>> [ 0.072014] vdd1p1: 800 <--> 1375 mV at 1100 mV
>> [ 0.073027] vdd3p0: 2800 <--> 3150 mV at 3000 mV
>> [ 0.073933] vdd2p5: 2000 <--> 2750 mV at 2400 mV
>> [ 0.074888] vddarm: 725 <--> 1450 mV at 1150 mV
>> [ 0.075935] vddpu: 725 <--> 1450 mV at 1150 mV
>> [ 0.076897] vddsoc: 725 <--> 1450 mV at 1200 mV
>
>> ,but since next-20141103 they do not probe anymore:
>> http://arm-soc.lixom.net/bootlogs/next/next-20141103/wandboard-arm-imx_v6_v7_defconfig.html
>
> That last log looks *extremely* unhappy in general, I can't actually see
> any references to attempts to do regulator things and there's lots of
> backtraces in there. AFAICT those regulators are anatop regulators and
> I can't find references to that driver or anything called "vdd".

Yes, so here is a cleaner one:
http://arm-soc.lixom.net/bootlogs/next/next-20141104/wandboard-arm-imx_v6_v7_defconfig.html

The anatop regulators is drivers/regulator/pfuze100-regulator.c and
the dt description is at:
arch/arm/boot/dts/imx6qdl.dtsi

On 20141104 they are not getting probed.


\
 
 \ /
  Last update: 2014-12-09 23:01    [W:0.057 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site