lkml.org 
[lkml]   [2014]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 07/22] [SCSI] mpt2sas: Complete the SCSI command with DID_RESET status for log_info value 0x0x32010081
From
On Thu, Dec 4, 2014 at 8:36 AM, Martin K. Petersen
<martin.petersen@oracle.com> wrote:
>>>>>> "Sreekanth" == Sreekanth Reddy <sreekanth.reddy@avagotech.com> writes:
>
> Sreekanth> For any SCSI command, if the driver receives IOC status =
> Sreekanth> SCSI_IOC_TERMINATED and log info = 0x32010081 then that
> Sreekanth> command will be completed with DID_RESET host status.
>
> What does that log info value mean?

The meaning of this log info value is "Virtual IO has failed and has
to be retried".

Firmware will provide this log info value with IOC Status
"SCSI_IOC_TERMINATED", whenever a drive (with is a part of a volume)
is pulled and pushed back with some minimal delay. With this log info
value, firmware informs the driver to retry the failed IO command
infinite times, so to provide some time for the firmware to discover
the reinserted drive successfully instated of just retrying failed
command for five times( doesn't giving enough time for firmware to
complete the drive discovery) and failing the IO permanently even
though drive came back successfully.

Regards,
Sreekanth.


\
 
 \ /
  Last update: 2014-12-09 13:41    [W:0.071 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site