Messages in this thread | | | From | Ray Jui <> | Subject | [PATCH v4 0/5] Add gpio support to Broadcom Cygnus SoC | Date | Mon, 8 Dec 2014 12:41:54 -0800 |
| |
This patchset contains the initial GPIO support for the Broadcom Cygnus SoC. Cygnus has 3 GPIO controllers: 1) the ASIU GPIO; 2) the chipCommonG GPIO; and 3) the ALWAYS-ON GPIO. All 3 types of GPIO controllers are supported by the same Cygnus GPIO driver
Changes from v3: - Fix dt property tpyo - Fix incorrect GPIO compatible ID in device tree binding document example
Changes from v2: - Consolidate different compatible IDs into "brcm,cygnus-gpio" - Get rid of redundant "no-interrupt" property
Changes from v1: - Get rid of inline qualifier - Get rid of redundant check in the ISR - Other minor fixes to imrove code readability
Ray Jui (5): gpio: Cygnus: define Broadcom Cygnus GPIO binding gpio: Cygnus: add GPIO driver ARM: mach-bcm: Enable GPIO support for Cygnus ARM: dts: enable GPIO for Broadcom Cygnus MAINTAINERS: Entry for Cygnus GPIO driver
.../devicetree/bindings/gpio/brcm,cygnus-gpio.txt | 82 +++ MAINTAINERS | 7 + arch/arm/boot/dts/bcm-cygnus.dtsi | 30 + arch/arm/mach-bcm/Kconfig | 1 + drivers/gpio/Kconfig | 11 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bcm-cygnus.c | 705 ++++++++++++++++++++ 7 files changed, 837 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/brcm,cygnus-gpio.txt create mode 100644 drivers/gpio/gpio-bcm-cygnus.c
-- 1.7.9.5
| |