lkml.org 
[lkml]   [2014]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/5] i2c: davinci: generate STP always when NACK is received
On Mon, Dec 01, 2014 at 05:34:04PM +0200, Grygorii Strashko wrote:
> According to I2C specification the NACK should be handled as follows:
> "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not
> Acknowledge signal. The master can then generate either a STOP condition to
> abort the transfer, or a repeated START condition to start a new transfer."
> [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf]
>
> Currently the Davinci i2c driver interrupts the transfer on receipt of a
> NACK but fails to send a STOP in some situations and so makes the bus
> stuck until next I2C IP reset (idle/enable).
>
> For example, the issue will happen during SMBus read transfer which
> consists from two i2c messages write command/address and read data:
>
> S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P

Applied to for-current, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-12-04 20:01    [W:0.149 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site