lkml.org 
[lkml]   [2014]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v15 09/12] input: cyapa: add gen5 trackpad device firmware update function support
Date


> -----Original Message-----
> From: linux-input-owner@vger.kernel.org
> [mailto:linux-input-owner@vger.kernel.org] On Behalf Of Benson Leung
> Sent: 2014年12月17日 4:25
> To: Jeremiah Mahler; Dudley Du; Dmitry Torokhov; Henrik Rydberg; Benson Leung;
> linux-input@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v15 09/12] input: cyapa: add gen5 trackpad device firmware
> update function support
>
> On Tue, Dec 16, 2014 at 5:56 AM, Jeremiah Mahler <jmmahler@gmail.com> wrote:
> > On Mon, Dec 15, 2014 at 02:23:20PM +0800, Dudley Du wrote:
> >> Add firmware image update function supported for gen5 trackpad device,
> >> it can be used through sysfs update_fw interface.
> >> TEST=test on Chromebooks.
> >>
> >> Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
> >> ---
> >> drivers/input/mouse/Kconfig | 1 +
> >> drivers/input/mouse/cyapa_gen5.c | 292
> ++++++++++++++++++++++++++++++++++++++-
> >> 2 files changed, 292 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> >> index d8b46b0..728490e 100644
> >> --- a/drivers/input/mouse/Kconfig
> >> +++ b/drivers/input/mouse/Kconfig
> >> @@ -206,6 +206,7 @@ config MOUSE_BCM5974
> >> config MOUSE_CYAPA
> >> tristate "Cypress APA I2C Trackpad support"
> >> depends on I2C
> >> + select CRC_ITU_T
> >> help
> >
> > Just found out that if I2C_DESIGNWARE_PCI isn't enabled the touchpad
> > won't work. Verify this on your machines. Then perhaps add a depends
> > for I2C_DESIGNWARE_PCI instead of I2C since it would include the former.
>
> This isn't strictly true on all devices, though. This is true on
> DESIGNWARE_PCI based devices like the Acer C720 and the HP Chromebook
> 14, but on other platforms that use Cypress trackpads, such as ARM
> platforms like the Samsung Chromebook Series 3 DESIGNWARE_PCI is not
> required, and will just result in a driver that's never used being
> built.
>
> The specific I2C bus that's being used here shouldn't matter here...
> that's more of a platform issue. In the case with Chromebooks, it
> might make sense to change drivers/platform/chrome/Kconfig so that
> CHROMEOS_LAPTOP depends on I2C_DESIGNWARE_PCI, maybe.
>

Thank you all for the information.
Then I won't change this depending on I2C.

> --
> Benson Leung
> Software Engineer, Chrome OS
> Google Inc.
> bleung@google.com
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

This message and any attachments may contain Cypress (or its subsidiaries) confidential information. If it has been received in error, please advise the sender and immediately delete this message.
\
 
 \ /
  Last update: 2014-12-17 03:21    [W:0.076 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site