lkml.org 
[lkml]   [2014]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCHv2 1/7] devfreq: event: Add new devfreq_event class to provide basic data for devfreq governor
From
Date
On pią, 2014-12-12 at 12:42 +0900, Chanwoo Choi wrote:
> Hi Krzysztof,
>
> I replied again this mail because I'll use the mutex for set_event()/get_event()
> according to your comment. But, of_parse_phandle() seems that this function
> don't need the of_node_put() function.
>
>
> On 12/11/2014 11:13 AM, Chanwoo Choi wrote:
> > Hi Krzysztof,
> >
> > First of all, thanks for your review.
> >
> > On 12/10/2014 06:37 PM, Krzysztof Kozlowski wrote:
> >> On wto, 2014-12-09 at 23:13 +0900, Chanwoo Choi wrote:
> >>> This patch add new devfreq_event class for devfreq_event device which provide
> >>> raw data (e.g., memory bus utilization/GPU utilization). This raw data from
> >>> devfreq_event data would be used for the governor of devfreq subsystem.
> >>> - devfreq_event device : Provide raw data for governor of existing devfreq device
> >>> - devfreq device : Monitor device state and change frequency/voltage of device
> >>> using the raw data from devfreq_event device
> >>>
> >>> The devfreq subsystem support generic DVFS(Dynamic Voltage/Frequency Scaling)
> >>> for Non-CPU Devices. The devfreq device would dertermine current device state
> >>> using various governor (e.g., ondemand, performance, powersave). After completed
> >>> determination of system state, devfreq device would change the frequency/voltage
> >>> of devfreq device according to the result of governor.
> >>>
> >>> But, devfreq governor must need basic data which indicates current device state.
> >>> Existing devfreq subsystem only consider devfreq device which check current system
> >>> state and determine proper system state using basic data. There is no subsystem
> >>> for device providing basic data to devfreq device.
> >>>
> >>> The devfreq subsystem must need devfreq_event device(data-provider device) for
> >>> existing devfreq device. So, this patch add new devfreq_event class for
> >>> devfreq_event device which read various basic data(e.g, memory bus utilization,
> >>> GPU utilization) and provide measured data to existing devfreq device through
> >>> standard APIs of devfreq_event class.
> >>>
> >>> The following description explains the feature of two kind of devfreq class:
> >>> - devfreq class (existing)
> >>> : devfreq consumer device use raw data from devfreq_event device for
> >>> determining proper current system state and change voltage/frequency
> >>> dynamically using various governors.
> >>>
> >>> - devfreq_event class (new)
> >>> : Provide measured raw data to devfreq device for governor
> >>>
> >>> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> >>> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> >>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> >>> ---
> >>> drivers/devfreq/Kconfig | 2 +
> >>> drivers/devfreq/Makefile | 5 +-
> >>> drivers/devfreq/devfreq-event.c | 302 ++++++++++++++++++++++++++++++++++++++++
> >>> drivers/devfreq/event/Makefile | 1 +
> >>> include/linux/devfreq.h | 141 +++++++++++++++++++
> >>> 5 files changed, 450 insertions(+), 1 deletion(-)
> >>> create mode 100644 drivers/devfreq/devfreq-event.c
> >>> create mode 100644 drivers/devfreq/event/Makefile
> >>>
> >>> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> >>> index faf4e70..4d15b62 100644
> >>> --- a/drivers/devfreq/Kconfig
> >>> +++ b/drivers/devfreq/Kconfig
> >>> @@ -87,4 +87,6 @@ config ARM_EXYNOS5_BUS_DEVFREQ
> >>> It reads PPMU counters of memory controllers and adjusts the
> >>> operating frequencies and voltages with OPP support.
> >>>
> >>> +comment "DEVFREQ Event Drivers"
> >>> +
> >>> endif # PM_DEVFREQ
> >>> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> >>> index 16138c9..a1ffabe 100644
> >>> --- a/drivers/devfreq/Makefile
> >>> +++ b/drivers/devfreq/Makefile
> >>> @@ -1,4 +1,4 @@
> >>> -obj-$(CONFIG_PM_DEVFREQ) += devfreq.o
> >>> +obj-$(CONFIG_PM_DEVFREQ) += devfreq.o devfreq-event.o
> >>> obj-$(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) += governor_simpleondemand.o
> >>> obj-$(CONFIG_DEVFREQ_GOV_PERFORMANCE) += governor_performance.o
> >>> obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o
> >>> @@ -7,3 +7,6 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
> >>> # DEVFREQ Drivers
> >>> obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
> >>> obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
> >>> +
> >>> +# DEVFREQ Event Drivers
> >>> +obj-$(CONFIG_PM_DEVFREQ) += event/
> >>> diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c
> >>> new file mode 100644
> >>> index 0000000..b47329f
> >>> --- /dev/null
> >>> +++ b/drivers/devfreq/devfreq-event.c
> >>> @@ -0,0 +1,302 @@
> >>> +/*
> >>> + * devfreq-event: Generic DEVFREQ Event class driver
> >>> + *
> >>> + * Copyright (C) 2014 Samsung Electronics
> >>> + * Chanwoo Choi <cw00.choi@samsung.com>
> >>> + *
> >>> + * This program is free software; you can redistribute it and/or modify
> >>> + * it under the terms of the GNU General Public License version 2 as
> >>> + * published by the Free Software Foundation.
> >>> + *
> >>> + * This driver is based on drivers/devfreq/devfreq.c
> >>> + */
> >>> +
> >>> +#include <linux/kernel.h>
> >>> +#include <linux/sched.h>
> >>> +#include <linux/errno.h>
> >>> +#include <linux/err.h>
> >>> +#include <linux/init.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/slab.h>
> >>> +#include <linux/stat.h>
> >>> +#include <linux/pm_opp.h>
> >>> +#include <linux/devfreq.h>
> >>> +#include <linux/workqueue.h>
> >>> +#include <linux/platform_device.h>
> >>> +#include <linux/list.h>
> >>> +#include <linux/printk.h>
> >>> +#include <linux/hrtimer.h>
> >>> +#include <linux/of.h>
> >>> +#include "governor.h"
> >>> +
> >>> +static struct class *devfreq_event_class;
> >>> +
> >>> +/* The list of all devfreq event list */
> >>> +static LIST_HEAD(devfreq_event_list);
> >>> +static DEFINE_MUTEX(devfreq_event_list_lock);
> >>> +
> >>> +#define to_devfreq_event(DEV) container_of(DEV, struct devfreq_event_dev, dev)
> >>> +
> >>> +struct devfreq_event_dev *devfreq_add_event_device(struct device *dev,
> >>> + struct devfreq_event_desc *desc)
> >>> +{
> >>> + struct devfreq_event_dev *event_dev;
> >>> + static atomic_t event_no = ATOMIC_INIT(0);
> >>> + int ret;
> >>> +
> >>> + if (!dev || !desc)
> >>> + return ERR_PTR(-EINVAL);
> >>> +
> >>> + if (!desc->name || !desc->ops)
> >>> + return ERR_PTR(-EINVAL);
> >>> +
> >>> + event_dev = kzalloc(sizeof(struct devfreq_event_dev), GFP_KERNEL);
> >>> + if (!event_dev)
> >>> + return ERR_PTR(-ENOMEM);
> >>
> >> Is this memory freed anywhere when driver is removed? I couldn't find
> >> it. I couldn't also find function like devfreq_remove_event_device()
> >> which would be reverting all the work done when adding.
> >
> > You're right. I'll use devm_kzalloc instead of kzalloc.
> >
> >>
> >>> +
> >>> + mutex_lock(&devfreq_event_list_lock);
> >>> +
> >>> + mutex_init(&event_dev->lock);
> >>> + event_dev->desc = desc;
> >>> + event_dev->dev.parent = dev;
> >>> + event_dev->dev.class = devfreq_event_class;
> >>> +
> >>> + dev_set_name(&event_dev->dev, "event.%d",
> >>> + atomic_inc_return(&event_no) - 1);
> >>> + ret = device_register(&event_dev->dev);
> >>> + if (ret != 0) {
> >>> + put_device(&event_dev->dev);
> >>> + goto err;
> >>> + }
> >>> + dev_set_drvdata(&event_dev->dev, event_dev);
> >>> +
> >>> + /* Add devfreq event device to devfreq_event_list */
> >>> + INIT_LIST_HEAD(&event_dev->node);
> >>> + list_add(&event_dev->node, &devfreq_event_list);
> >>> +
> >>> + mutex_unlock(&devfreq_event_list_lock);
> >>> +
> >>> + return event_dev;
> >>> +err:
> >>
> >> Missing 'mutex_unlock(&devfreq_event_list_lock)' here.
> >
> > OK. I'll fix it.
> >
> >>
> >>
> >>> + kfree(event_dev);
> >>> + return ERR_PTR(ret);
> >>> +}
> >>> +EXPORT_SYMBOL(devfreq_add_event_device);
> >>> +
> >>> +struct devfreq_event_dev *devfreq_get_event_dev(const char *event_dev_name)
> >>> +{
> >>> + struct devfreq_event_dev *event_dev;
> >>> +
> >>> + mutex_lock(&devfreq_event_list_lock);
> >>> + list_for_each_entry(event_dev, &devfreq_event_list, node) {
> >>> + if (!strcmp(event_dev->desc->name, event_dev_name))
> >>> + goto out;
> >>> + }
> >>> + event_dev = NULL;
> >>> +out:
> >>> + mutex_unlock(&devfreq_event_list_lock);
> >>> +
> >>> + return event_dev;
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(devfreq_get_event_dev);
> >>> +
> >>> +struct devfreq_event_dev *devfreq_get_event_dev_by_phandle(struct device *dev,
> >>> + int index)
> >>> +{
> >>> + struct device_node *node;
> >>> + struct devfreq_event_dev *event_dev;
> >>> +
> >>> + if (!dev->of_node) {
> >>> + dev_err(dev, "device does not have a device node entry\n");
> >>> + return ERR_PTR(-EINVAL);
> >>> + }
> >>> +
> >>> + node = of_parse_phandle(dev->of_node, "devfreq-events", index);
> >>> + if (!node) {
> >>> + dev_err(dev, "failed to get phandle in %s node\n",
> >>> + dev->of_node->full_name);
> >>> + return ERR_PTR(-ENODEV);
> >>> + }
> >>> +
> >>> + event_dev = devfreq_get_event_dev(node->name);
> >>> + if (!event_dev) {
> >>> + dev_err(dev, "unable to get devfreq-event device : %s\n",
> >>> + node->name);
> >>
> >> of_node_put() for node obtained with of_parse_phandle().
> >
> > OK. I'll add it.
>
> of_parse_phandle() seems that it don't need of_node_put().

The of_parse_phandle() increases the refcount for node it returns.
From documentation:

/**
* Returns the device_node pointer with refcount incremented. Use
* of_node_put() on it when done.
*/

The function returns error condition but node was found and its refcnt
was incremented. Then why do you think that of_node_put() is not
necessary here?

>
> >
> >>
> >>> + return ERR_PTR(-ENODEV);
> >>> + }
> >>> +
> >>> + return event_dev;
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(devfreq_get_event_dev_by_phandle);
> >>> +
> >>> +int devfreq_put_event_dev(struct devfreq_event_dev *event_dev)
> >>> +{
> >>
> >> of_node_put() here to decrement refcnt from of_parse_phandle()?
> >
> > It is my mistake. I think that devfreq_put_event_dev is not necesssary.
> > I'll remove it.

Then how to decrease the refcnt for node obtained in
devfreq_get_event_dev_by_phandle()?

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2014-12-15 12:01    [W:1.913 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site