lkml.org 
[lkml]   [2014]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PM / sleep: add configurable delay for pm_test
Hi Rafael,

On Wed, Sep 03, 2014 at 04:55:35PM -0700, Brian Norris wrote:
> When CONFIG_PM_DEBUG=y, we provide a sysfs file (/sys/power/pm_test) for
> selecting one of a few suspend test modes, where rather than entering a
> full suspend state, the kernel will perform some subset of suspend
> steps, wait 5 seconds, and then resume back to normal operation.
>
> This mode is useful for (among other things) observing the state of the
> system just before entering a sleep mode, for debugging or analysis
> purposes. However, a constant 5 second wait is not sufficient for some
> sorts of analysis; for example, on an SoC, one might want to use
> external tools to probe the power states of various on-chip controllers
> or clocks.
>
> This patch adds a companion sysfs file (/sys/power/pm_test_delay) that
> allows user-space to configure how long the system waits in this test
> state before resuming. It also updates the PM debugging documentation to
> mention the new file.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

What do you think about this patch? It seems there is at least one other
developer who is independently interested in this.

Thanks,
Brian

> ---
> Documentation/power/basic-pm-debugging.txt | 14 ++++++++------
> kernel/power/main.c | 27 +++++++++++++++++++++++++++
> kernel/power/power.h | 5 +++++
> kernel/power/suspend.c | 8 ++++++--
> 4 files changed, 46 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
> index edeecd447d23..bd9f27ae99fe 100644
> --- a/Documentation/power/basic-pm-debugging.txt
> +++ b/Documentation/power/basic-pm-debugging.txt
> @@ -75,12 +75,14 @@ you should do the following:
> # echo platform > /sys/power/disk
> # echo disk > /sys/power/state
>
> -Then, the kernel will try to freeze processes, suspend devices, wait 5 seconds,
> -resume devices and thaw processes. If "platform" is written to
> -/sys/power/pm_test , then after suspending devices the kernel will additionally
> -invoke the global control methods (eg. ACPI global control methods) used to
> -prepare the platform firmware for hibernation. Next, it will wait 5 seconds and
> -invoke the platform (eg. ACPI) global methods used to cancel hibernation etc.
> +Then, the kernel will try to freeze processes, suspend devices, wait a few
> +seconds (5 by default, but configurable via /sys/power/pm_test_delay), resume
> +devices and thaw processes. If "platform" is written to /sys/power/pm_test,
> +then after suspending devices the kernel will additionally invoke the global
> +control methods (eg. ACPI global control methods) used to prepare the platform
> +firmware for hibernation. Next, it will wait a configurable number of seconds
> +and invoke the platform (eg. ACPI) global methods used to cancel hibernation
> +etc.
>
> Writing "none" to /sys/power/pm_test causes the kernel to switch to the normal
> hibernation/suspend operations. Also, when open for reading, /sys/power/pm_test
> diff --git a/kernel/power/main.c b/kernel/power/main.c
> index 9a59d042ea84..4d242c8b43a0 100644
> --- a/kernel/power/main.c
> +++ b/kernel/power/main.c
> @@ -73,6 +73,7 @@ power_attr(pm_async);
>
> #ifdef CONFIG_PM_DEBUG
> int pm_test_level = TEST_NONE;
> +int pm_test_seconds = PM_TEST_DELAY_DEFAULT;
>
> static const char * const pm_tests[__TEST_AFTER_LAST] = {
> [TEST_NONE] = "none",
> @@ -132,6 +133,31 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr,
> }
>
> power_attr(pm_test);
> +
> +static ssize_t pm_test_delay_show(struct kobject *kobj,
> + struct kobj_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "%d\n", pm_test_seconds);
> +}
> +
> +static ssize_t pm_test_delay_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t n)
> +{
> + int val;
> +
> + if (kstrtoint(buf, 10, &val))
> + return -EINVAL;
> +
> + if (val < 0)
> + return -EINVAL;
> +
> + pm_test_seconds = val;
> +
> + return n;
> +}
> +
> +power_attr(pm_test_delay);
> #endif /* CONFIG_PM_DEBUG */
>
> #ifdef CONFIG_DEBUG_FS
> @@ -601,6 +627,7 @@ static struct attribute * g[] = {
> #endif
> #ifdef CONFIG_PM_DEBUG
> &pm_test_attr.attr,
> + &pm_test_delay_attr.attr,
> #endif
> #ifdef CONFIG_PM_SLEEP_DEBUG
> &pm_print_times_attr.attr,
> diff --git a/kernel/power/power.h b/kernel/power/power.h
> index 5d49dcac2537..28111795da71 100644
> --- a/kernel/power/power.h
> +++ b/kernel/power/power.h
> @@ -230,6 +230,11 @@ enum {
>
> extern int pm_test_level;
>
> +/* Default to 5 second delay */
> +#define PM_TEST_DELAY_DEFAULT 5
> +
> +extern int pm_test_seconds;
> +
> #ifdef CONFIG_SUSPEND_FREEZER
> static inline int suspend_freeze_processes(void)
> {
> diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
> index 6dadb25cb0d8..2372a99d4356 100644
> --- a/kernel/power/suspend.c
> +++ b/kernel/power/suspend.c
> @@ -196,8 +196,12 @@ static int suspend_test(int level)
> {
> #ifdef CONFIG_PM_DEBUG
> if (pm_test_level == level) {
> - printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
> - mdelay(5000);
> + int i;
> +
> + pr_info("suspend debug: waiting for %d second(s)\n",
> + pm_test_seconds);
> + for (i = 0; i < pm_test_seconds; i++)
> + mdelay(1000);
> return 1;
> }
> #endif /* !CONFIG_PM_DEBUG */
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2014-12-13 04:21    [W:0.126 / U:23.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site