lkml.org 
[lkml]   [2014]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add PCIe support to Broadcom iProc
Date
This patchset contains the initial PCIe support for Broadcom iProc family of
SoCs. This driver has been validated with Cygnus and NSP and is expected to
work on other iProc family of SoCs that deploy the same PCIe controller

Changes from v1:
- Add standard PCI interrupt DT properties "#interrupt-cells",
"interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be
supported by using standard PCI OF IRQ parsing function
- Get rid of custom IRQ mapping function in the driver. Use
of_irq_parse_and_map_pci instead

Ray Jui (4):
pci: iProc: define Broadcom iProc PCIe binding
PCI: iproc: Add Broadcom iProc PCIe driver
ARM: mach-bcm: Enable PCIe support for iProc
ARM: dts: enable PCIe for Broadcom Cygnus

.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 74 ++
arch/arm/boot/dts/bcm-cygnus.dtsi | 52 ++
arch/arm/boot/dts/bcm958300k.dts | 8 +
arch/arm/mach-bcm/Kconfig | 1 +
drivers/pci/host/Kconfig | 9 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pcie-iproc.c | 888 ++++++++++++++++++++
7 files changed, 1033 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
create mode 100644 drivers/pci/host/pcie-iproc.c

--
1.7.9.5



\
 
 \ /
  Last update: 2014-12-12 04:01    [W:0.190 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site