lkml.org 
[lkml]   [2014]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v14 05/12] input: cyapa: add sysfs interfaces supported in the cyapa driver
Date
Add device's basic control and features supported in cyapa driver through
sysfs file system interfaces. These interfaces are commonly used in
pre- and after production, for trackpad device state checking, managing
and firmware image updating.
These interfaces including mode, firmware_version and product_id interfaces
for reading firmware version and trackpad device product id values,
and including update_fw interface to command firmware image update
process. Also including baseline and calibrate interfaces for
reading and checking trackpad device's sensors states.
TEST=test on Chromebooks.

Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
---
drivers/input/mouse/cyapa.c | 327 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 327 insertions(+)

diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index f19754c..ff8cd9b 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -32,6 +32,8 @@
#define CYAPA_ADAPTER_FUNC_SMBUS 2
#define CYAPA_ADAPTER_FUNC_BOTH 3

+#define CYAPA_FW_NAME "cyapa.bin"
+
const char unique_str[] = "CYTRA";

static int cyapa_reinitialize(struct cyapa *cyapa);
@@ -449,6 +451,29 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
return 0;
}

+static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa)
+{
+ struct input_dev *input = cyapa->input;
+
+ if (!input || !input->users) {
+ if (!CYAPA_BOOTLOADER(cyapa) && cyapa->ops->set_power_mode)
+ cyapa->ops->set_power_mode(cyapa,
+ PWR_MODE_FULL_ACTIVE, 0);
+ enable_irq(cyapa->client->irq);
+ }
+}
+
+static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa)
+{
+ struct input_dev *input = cyapa->input;
+
+ if (!input || !input->users) {
+ disable_irq(cyapa->client->irq);
+ if (!CYAPA_BOOTLOADER(cyapa) && cyapa->ops->set_power_mode)
+ cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
+ }
+}
+
/*
* cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time
*
@@ -790,6 +815,295 @@ static int cyapa_start_runtime(struct cyapa *cyapa)
}
#endif /* CONFIG_PM_RUNTIME */

+static ssize_t cyapa_show_fm_ver(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int error;
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+ error = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver,
+ cyapa->fw_min_ver);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error;
+}
+
+static ssize_t cyapa_show_product_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int size;
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+ size = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id);
+ mutex_unlock(&cyapa->state_sync_lock);
+ return size;
+}
+
+static int cyapa_firmware(struct cyapa *cyapa, const char *fw_name)
+{
+ struct device *dev = &cyapa->client->dev;
+ const struct firmware *fw;
+ int error;
+
+ error = request_firmware(&fw, fw_name, dev);
+ if (error) {
+ dev_err(dev, "Could not load firmware from %s: %d\n",
+ fw_name, error);
+ return error;
+ }
+
+ if (cyapa->ops->check_fw) {
+ error = cyapa->ops->check_fw(cyapa, fw);
+ if (error) {
+ dev_err(dev, "Invalid CYAPA firmware image: %s\n",
+ fw_name);
+ goto done;
+ }
+ } else {
+ dev_err(dev, "No valid device ops->check_fw handler set.\n");
+ error = -ENODEV;
+ goto done;
+ }
+
+ /*
+ * Resume the potentially suspended device because doing FW
+ * update on a device not in the FULL mode has a chance to
+ * fail.
+ */
+ pm_runtime_get_sync(dev);
+
+ /* Require IRQ support for firmware update commands. */
+ cyapa_enable_irq_for_cmd(cyapa);
+
+ if (cyapa->ops->bl_enter) {
+ error = cyapa->ops->bl_enter(cyapa);
+ if (error) {
+ dev_err(dev, "bl_enter failed, %d\n", error);
+ goto err_detect;
+ }
+ }
+
+ if (cyapa->ops->bl_activate) {
+ error = cyapa->ops->bl_activate(cyapa);
+ if (error) {
+ dev_err(dev, "bl_activate failed, %d\n", error);
+ goto err_detect;
+ }
+ }
+
+ if (cyapa->ops->bl_initiate) {
+ error = cyapa->ops->bl_initiate(cyapa, fw);
+ if (error) {
+ dev_err(dev, "bl_initiate failed, %d\n", error);
+ goto err_detect;
+ }
+ }
+
+ if (cyapa->ops->update_fw) {
+ error = cyapa->ops->update_fw(cyapa, fw);
+ if (error) {
+ dev_err(dev, "update_fw failed, %d\n", error);
+ goto err_detect;
+ }
+ }
+
+ if (cyapa->ops->bl_verify_app_integrity) {
+ error = cyapa->ops->bl_verify_app_integrity(cyapa);
+ if (error) {
+ dev_err(dev, "bl_verify_app_integrity failed, %d\n",
+ error);
+ goto err_detect;
+ }
+ }
+
+err_detect:
+ cyapa_disable_irq_for_cmd(cyapa);
+ pm_runtime_put_noidle(dev);
+
+done:
+ release_firmware(fw);
+ return error;
+}
+
+static ssize_t cyapa_update_fw_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ char fw_name[64];
+ int ret, error;
+
+ if (count > 64) {
+ dev_err(dev, "File name too long\n");
+ return -EINVAL;
+ }
+
+ memcpy(fw_name, buf, count);
+ if (fw_name[count - 1] == '\n')
+ fw_name[count - 1] = '\0';
+ else
+ fw_name[count] = '\0';
+
+ if (cyapa->input) {
+ /*
+ * Force the input device to be registered after the firmware
+ * image is updated, so if the corresponding parameters updated
+ * in the new firmware image can taken effect immediately.
+ */
+ input_unregister_device(cyapa->input);
+ cyapa->operational = false;
+ cyapa->input = NULL;
+ }
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error) {
+ /*
+ * Whatever, do reinitialize to try to recover TP state to
+ * previous state just as it entered fw update entrance.
+ */
+ cyapa_reinitialize(cyapa);
+ return error;
+ }
+
+ error = cyapa_firmware(cyapa, fw_name);
+ if (error)
+ dev_err(dev, "firmware update failed: %d\n", error);
+ else
+ dev_dbg(dev, "firmware update successfully done.\n");
+
+ /*
+ * Redetect trackpad device states because firmware update process
+ * will reset trackpad device into bootloader mode.
+ */
+ ret = cyapa_reinitialize(cyapa);
+ if (ret) {
+ dev_err(dev, "failed to redetect after updated: %d\n", ret);
+ error = error ? error : ret;
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+
+ return error ? error : count;
+}
+
+static ssize_t cyapa_calibrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ if (!cyapa->ops->calibrate_store) {
+ dev_err(dev, "Calibrate operation not supported.\n");
+ error = -ENOTSUPP;
+ } else {
+ cyapa_enable_irq_for_cmd(cyapa);
+ error = cyapa->ops->calibrate_store(dev, attr, buf, count);
+ cyapa_disable_irq_for_cmd(cyapa);
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error < 0 ? error : count;
+}
+
+static ssize_t cyapa_show_baseline(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ ssize_t error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ if (!cyapa->ops->show_baseline) {
+ dev_err(dev, "Calibrate operation not supported.\n");
+ error = -ENOTSUPP;
+ } else {
+ cyapa_enable_irq_for_cmd(cyapa);
+ error = cyapa->ops->show_baseline(dev, attr, buf);
+ cyapa_disable_irq_for_cmd(cyapa);
+ }
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return error;
+}
+
+static char *cyapa_state_to_string(struct cyapa *cyapa)
+{
+ switch (cyapa->state) {
+ case CYAPA_STATE_BL_BUSY:
+ return "bootloader busy";
+ case CYAPA_STATE_BL_IDLE:
+ return "bootloader idle";
+ case CYAPA_STATE_BL_ACTIVE:
+ return "bootloader active";
+ case CYAPA_STATE_GEN5_BL:
+ return "bootloader";
+ case CYAPA_STATE_OP:
+ case CYAPA_STATE_GEN5_APP:
+ return "operational"; /* Normal valid state. */
+ default:
+ return "invalid mode";
+ }
+}
+
+static ssize_t cyapa_show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int size;
+ int error;
+
+ error = mutex_lock_interruptible(&cyapa->state_sync_lock);
+ if (error)
+ return error;
+
+ size = scnprintf(buf, PAGE_SIZE, "gen%d %s\n",
+ cyapa->gen, cyapa_state_to_string(cyapa));
+
+ mutex_unlock(&cyapa->state_sync_lock);
+ return size;
+}
+
+static DEVICE_ATTR(firmware_version, S_IRUGO, cyapa_show_fm_ver, NULL);
+static DEVICE_ATTR(product_id, S_IRUGO, cyapa_show_product_id, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, cyapa_update_fw_store);
+static DEVICE_ATTR(baseline, S_IRUGO, cyapa_show_baseline, NULL);
+static DEVICE_ATTR(calibrate, S_IWUSR, NULL, cyapa_calibrate_store);
+static DEVICE_ATTR(mode, S_IRUGO, cyapa_show_mode, NULL);
+
+static struct attribute *cyapa_sysfs_entries[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_update_fw.attr,
+ &dev_attr_baseline.attr,
+ &dev_attr_calibrate.attr,
+ &dev_attr_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group cyapa_sysfs_group = {
+ .attrs = cyapa_sysfs_entries,
+};
+
+static void cyapa_remove_sysfs_group(void *data)
+{
+ struct cyapa *cyapa = data;
+
+ sysfs_remove_group(&cyapa->client->dev.kobj, &cyapa_sysfs_group);
+}
+
static int cyapa_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
@@ -829,6 +1143,19 @@ static int cyapa_probe(struct i2c_client *client,
return error;
}

+ error = sysfs_create_group(&client->dev.kobj, &cyapa_sysfs_group);
+ if (error) {
+ dev_err(dev, "failed to create sysfs entries: %d\n", error);
+ return error;
+ }
+
+ error = devm_add_action(dev, cyapa_remove_sysfs_group, cyapa);
+ if (error) {
+ cyapa_remove_sysfs_group(cyapa);
+ dev_err(dev, "failed to add sysfs cleanup action: %d\n", error);
+ return error;
+ }
+
#ifdef CONFIG_PM_SLEEP
if (device_can_wakeup(dev)) {
error = sysfs_merge_group(&client->dev.kobj,
--
1.9.1


\
 
 \ /
  Last update: 2014-12-12 04:01    [W:0.163 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site