lkml.org 
[lkml]   [2014]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v9 01/18] input: cyapa: add device resource management infrastructure support
Hi Dudley,

On Mon, Nov 03, 2014 at 04:32:53PM +0800, Dudley Du wrote:
> Modify cyapa driver to support device resource management infrastructure
> to reduce the mistakes of resource management.
> TEST=test on Chromebooks.
>
> Signed-off-by: Dudley Du <dudl@cypress.com>
> ---
> drivers/input/mouse/cyapa.c | 48 ++++++++++++++++++---------------------------
> 1 file changed, 19 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index b409c3d..b3d7a2a 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -409,11 +409,11 @@ static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
> cmd = cyapa_smbus_cmds[cmd_idx].cmd;
> len = cyapa_smbus_cmds[cmd_idx].len;
> return cyapa_smbus_read_block(cyapa, cmd, len, values);
> - } else {
> - cmd = cyapa_i2c_cmds[cmd_idx].cmd;
> - len = cyapa_i2c_cmds[cmd_idx].len;
> - return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);
> }
> +
> + cmd = cyapa_i2c_cmds[cmd_idx].cmd;
> + len = cyapa_i2c_cmds[cmd_idx].len;
> + return cyapa_i2c_reg_read_block(cyapa, cmd, len, values);

I am not sure why you are changing this code, it has nothing to do with
managed resources and the original was just fine.

> }
>
> /*
> @@ -762,7 +762,7 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
> if (!cyapa->physical_size_x || !cyapa->physical_size_y)
> return -EINVAL;
>
> - input = cyapa->input = input_allocate_device();
> + input = cyapa->input = devm_input_allocate_device(dev);

If you are using devm_* then you do not need to manually cal
input_free_device() (further down in this fucntion).

> if (!input) {
> dev_err(dev, "allocate memory for input device failed\n");
> return -ENOMEM;
> @@ -837,11 +837,9 @@ static int cyapa_probe(struct i2c_client *client,
> return -EIO;
> }
>
> - cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
> - if (!cyapa) {
> - dev_err(dev, "allocate memory for cyapa failed\n");
> + cyapa = devm_kzalloc(dev, sizeof(struct cyapa), GFP_KERNEL);
> + if (!cyapa)
> return -ENOMEM;
> - }
>
> cyapa->gen = CYAPA_GEN3;
> cyapa->client = client;
> @@ -856,51 +854,43 @@ static int cyapa_probe(struct i2c_client *client,
> ret = cyapa_check_is_operational(cyapa);
> if (ret) {
> dev_err(dev, "device not operational, %d\n", ret);
> - goto err_mem_free;
> + return ret;
> }
>
> ret = cyapa_create_input_dev(cyapa);
> if (ret) {
> dev_err(dev, "create input_dev instance failed, %d\n", ret);
> - goto err_mem_free;
> + return ret;
> }
>
> ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
> if (ret) {
> dev_err(dev, "set active power failed, %d\n", ret);
> - goto err_unregister_device;
> + return ret;
> }
>
> cyapa->irq = client->irq;
> - ret = request_threaded_irq(cyapa->irq,
> - NULL,
> - cyapa_irq,
> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> - "cyapa",
> - cyapa);
> + ret = devm_request_threaded_irq(dev,
> + cyapa->irq,
> + NULL,
> + cyapa_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "cyapa",
> + cyapa);
> if (ret) {
> dev_err(dev, "IRQ request failed: %d\n, ", ret);
> - goto err_unregister_device;
> + return ret;
> }
>
> return 0;
> -
> -err_unregister_device:
> - input_unregister_device(cyapa->input);
> -err_mem_free:
> - kfree(cyapa);
> -
> - return ret;
> }
>
> static int cyapa_remove(struct i2c_client *client)
> {
> struct cyapa *cyapa = i2c_get_clientdata(client);
>
> - free_irq(cyapa->irq, cyapa);
> - input_unregister_device(cyapa->input);
> + disable_irq(cyapa->irq);
> cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
> - kfree(cyapa);

I refer devm* conversions to completely eradicate ->remove() methods.
I took the liberty to edit the patch a bit, does the version below work
for you?

Thanks!

--
Dmitry


Input: cyapa - switch to using managed resources

From: Dudley Du <dudley.dulixin@gmail.com>

Use of managed resources simplifies error handling and device removal code.

Signed-off-by: Dudley Du <dudl@cypress.com>
[Dmitry: added open/close methods so cyapa_remove is no longer needed.]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/cyapa.c | 184 +++++++++++++++++++++++++------------------
1 file changed, 105 insertions(+), 79 deletions(-)

diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index 1d978c7..c84a9eb 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -577,10 +577,13 @@ static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode)
power = ret & ~PWR_MODE_MASK;
power |= power_mode & PWR_MODE_MASK;
ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power);
- if (ret < 0)
+ if (ret < 0) {
dev_err(dev, "failed to set power_mode 0x%02x err = %d\n",
power_mode, ret);
- return ret;
+ return ret;
+ }
+
+ return 0;
}

static int cyapa_get_query_data(struct cyapa *cyapa)
@@ -753,16 +756,40 @@ static u8 cyapa_check_adapter_functionality(struct i2c_client *client)
return ret;
}

+static int cyapa_open(struct input_dev *input)
+{
+ struct cyapa *cyapa = input_get_drvdata(input);
+ struct i2c_client *client = cyapa->client;
+ int error;
+
+ error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+ if (error) {
+ dev_err(&client->dev, "set active power failed: %d\n", error);
+ return error;
+ }
+
+ enable_irq(client->irq);
+ return 0;
+}
+
+static void cyapa_close(struct input_dev *input)
+{
+ struct cyapa *cyapa = input_get_drvdata(input);
+
+ disable_irq(cyapa->client->irq);
+ cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
+}
+
static int cyapa_create_input_dev(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
- int ret;
struct input_dev *input;
+ int error;

if (!cyapa->physical_size_x || !cyapa->physical_size_y)
return -EINVAL;

- input = cyapa->input = input_allocate_device();
+ input = devm_input_allocate_device(dev);
if (!input) {
dev_err(dev, "allocate memory for input device failed\n");
return -ENOMEM;
@@ -775,6 +802,9 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
input->id.product = 0; /* means any product in eventcomm. */
input->dev.parent = &cyapa->client->dev;

+ input->open = cyapa_open;
+ input->close = cyapa_close;
+
input_set_drvdata(input, cyapa);

__set_bit(EV_ABS, input->evbit);
@@ -802,34 +832,24 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);

/* handle pointer emulation and unused slots in core */
- ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
- INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
- if (ret) {
- dev_err(dev, "allocate memory for MT slots failed, %d\n", ret);
- goto err_free_device;
+ error = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
+ INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "failed to initialize MT slots: %d\n", error);
+ return error;
}

- /* Register the device in input subsystem */
- ret = input_register_device(input);
- if (ret) {
- dev_err(dev, "input device register failed, %d\n", ret);
- goto err_free_device;
- }
+ cyapa->input = input;
return 0;
-
-err_free_device:
- input_free_device(input);
- cyapa->input = NULL;
- return ret;
}

static int cyapa_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
- int ret;
- u8 adapter_func;
- struct cyapa *cyapa;
struct device *dev = &client->dev;
+ struct cyapa *cyapa;
+ u8 adapter_func;
+ int error;

adapter_func = cyapa_check_adapter_functionality(client);
if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) {
@@ -837,11 +857,9 @@ static int cyapa_probe(struct i2c_client *client,
return -EIO;
}

- cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
- if (!cyapa) {
- dev_err(dev, "allocate memory for cyapa failed\n");
+ cyapa = devm_kzalloc(dev, sizeof(struct cyapa), GFP_KERNEL);
+ if (!cyapa)
return -ENOMEM;
- }

cyapa->gen = CYAPA_GEN3;
cyapa->client = client;
@@ -852,66 +870,61 @@ static int cyapa_probe(struct i2c_client *client,
/* i2c isn't supported, use smbus */
if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS)
cyapa->smbus = true;
+
cyapa->state = CYAPA_STATE_NO_DEVICE;
- ret = cyapa_check_is_operational(cyapa);
- if (ret) {
- dev_err(dev, "device not operational, %d\n", ret);
- goto err_mem_free;
- }

- ret = cyapa_create_input_dev(cyapa);
- if (ret) {
- dev_err(dev, "create input_dev instance failed, %d\n", ret);
- goto err_mem_free;
+ error = cyapa_check_is_operational(cyapa);
+ if (error) {
+ dev_err(dev, "device not operational, %d\n", error);
+ return error;
}

- ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
- if (ret) {
- dev_err(dev, "set active power failed, %d\n", ret);
- goto err_unregister_device;
+ /* Power down the device until we need it */
+ error = cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
+ if (error) {
+ dev_err(dev, "failed to quiesce the device: %d\n", error);
+ return error;
}

- cyapa->irq = client->irq;
- ret = request_threaded_irq(cyapa->irq,
- NULL,
- cyapa_irq,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "cyapa",
- cyapa);
- if (ret) {
- dev_err(dev, "IRQ request failed: %d\n, ", ret);
- goto err_unregister_device;
+ error = cyapa_create_input_dev(cyapa);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(dev, client->irq,
+ NULL, cyapa_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "cyapa", cyapa);
+ if (error) {
+ dev_err(dev, "IRQ request failed: %d\n, ", error);
+ return error;
}

- return 0;
-
-err_unregister_device:
- input_unregister_device(cyapa->input);
-err_mem_free:
- kfree(cyapa);
+ /* Disable IRQ until the device is opened */
+ disable_irq(client->irq);

- return ret;
-}
-
-static int cyapa_remove(struct i2c_client *client)
-{
- struct cyapa *cyapa = i2c_get_clientdata(client);
-
- free_irq(cyapa->irq, cyapa);
- input_unregister_device(cyapa->input);
- cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
- kfree(cyapa);
+ /* Register the device in input subsystem */
+ error = input_register_device(cyapa->input);
+ if (error) {
+ dev_err(dev, "failed to register input device: %d\n", error);
+ return error;
+ }

return 0;
}

static int __maybe_unused cyapa_suspend(struct device *dev)
{
- int ret;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cyapa *cyapa = i2c_get_clientdata(client);
+ struct input_dev *input = cyapa->input;
u8 power_mode;
- struct cyapa *cyapa = dev_get_drvdata(dev);
+ int error;
+
+ error = mutex_lock_interruptible(&input->mutex);
+ if (error)
+ return error;

- disable_irq(cyapa->irq);
+ disable_irq(client->irq);

/*
* Set trackpad device to idle mode if wakeup is allowed,
@@ -919,28 +932,42 @@ static int __maybe_unused cyapa_suspend(struct device *dev)
*/
power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE
: PWR_MODE_OFF;
- ret = cyapa_set_power_mode(cyapa, power_mode);
- if (ret < 0)
- dev_err(dev, "set power mode failed, %d\n", ret);
+ error = cyapa_set_power_mode(cyapa, power_mode);
+ if (error)
+ dev_err(dev, "resume: set power mode to %d failed: %d\n",
+ power_mode, error);

if (device_may_wakeup(dev))
cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0);
+
+ mutex_unlock(&input->mutex);
+
return 0;
}

static int __maybe_unused cyapa_resume(struct device *dev)
{
- int ret;
- struct cyapa *cyapa = dev_get_drvdata(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cyapa *cyapa = i2c_get_clientdata(client);
+ struct input_dev *input = cyapa->input;
+ u8 power_mode;
+ int error;
+
+ mutex_lock(&input->mutex);

if (device_may_wakeup(dev) && cyapa->irq_wake)
disable_irq_wake(cyapa->irq);

- ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
- if (ret)
- dev_warn(dev, "resume active power failed, %d\n", ret);
+ power_mode = input->users ? PWR_MODE_FULL_ACTIVE : PWR_MODE_OFF;
+ error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
+ if (error)
+ dev_warn(dev, "resume: set power mode to %d failed: %d\n",
+ power_mode, error);

enable_irq(cyapa->irq);
+
+ mutex_unlock(&input->mutex);
+
return 0;
}

@@ -960,7 +987,6 @@ static struct i2c_driver cyapa_driver = {
},

.probe = cyapa_probe,
- .remove = cyapa_remove,
.id_table = cyapa_id_table,
};


\
 
 \ /
  Last update: 2014-11-09 22:41    [W:0.191 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site