lkml.org 
[lkml]   [2014]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mmc: core: fix card detection regression
From
Hi Kristina,

On Tue, Nov 4, 2014 at 10:22 PM, Kristina Martšenko
<kristina.martsenko@gmail.com> wrote:
> Since commit 89168b489915 ("mmc: core: restore detect line inversion
> semantics"), the SD card on i.MX28 (and possibly other) devices isn't
> detected and booting stops at:
>
> [ 4.120617] Waiting for root device /dev/mmcblk0p3...
>
> This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly
> when the host controller doesn't use a GPIO for card detection (but
> instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will
> return before assigning to the gpio_invert variable, leaving the
> variable uninitialized. The variable then gets used to set the flag.
> This patch fixes the issue by making sure gpio_invert is set to false
> when a GPIO isn't used. After this patch, i.MX28 boots fine.
>
> The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly
> for the exact same reason (it uses the same uninitialized variable), so
> this patch fixes that too.
>
> Fixes: 89168b489915 ("mmc: core: restore detect line inversion semantics")
> Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
> Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>

This fixes mx28 card detection, thanks!

Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-11-05 02:21    [W:1.181 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site