lkml.org 
[lkml]   [2014]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: (ibmpowernv) Use platform 'id_table' to probe the device

On 11/04/2014 07:58 PM, Guenter Roeck wrote:
> On 11/03/2014 11:30 PM, Neelesh Gupta wrote:
>> The current driver probe() function assumes the sensor device to be
>> alwary present and gets executed every time if the driver is loaded,
>> but the appropriate hardware could not be present.
>>
>> So, move the platform device creation as part of platform init code
>> and use the 'id_table' to check if the device present or not.
>>
>> Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
>> ---
>> arch/powerpc/platforms/powernv/opal-sensor.c | 20 ++++++++
>> drivers/hwmon/ibmpowernv.c | 67
>> +++++++-------------------
>> 2 files changed, 39 insertions(+), 48 deletions(-)
>>
>> diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c
>> b/arch/powerpc/platforms/powernv/opal-sensor.c
>> index 10271ad..215c418 100644
>> --- a/arch/powerpc/platforms/powernv/opal-sensor.c
>> +++ b/arch/powerpc/platforms/powernv/opal-sensor.c
>> @@ -20,7 +20,9 @@
>>
>> #include <linux/delay.h>
>> #include <linux/mutex.h>
>> +#include <linux/of_platform.h>
>> #include <asm/opal.h>
>> +#include <asm/machdep.h>
>>
>> static DEFINE_MUTEX(opal_sensor_mutex);
>>
>> @@ -64,3 +66,21 @@ out:
>> return ret;
>> }
>> EXPORT_SYMBOL_GPL(opal_get_sensor_data);
>> +
>> +static __init int opal_sensor_init(void)
>> +{
>> + struct platform_device *pdev;
>> + struct device_node *sensor;
>> +
>> + sensor = of_find_node_by_path("/ibm,opal/sensors");
>> + if (sensor) {
>> + pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
>> + of_node_put(sensor);
>> + } else {
>> + pr_info("Opal node 'sensors' not found\n");
>
> Hi Neelesh,
>
> this is either an error and should be reported with pr_err, or it is
> a valid condition and should be reported with pr_debug or not at all.
>
> Which one is it ?

Should be logged using pr_err(), will fix and send the next version.

Thanks,
Neelesh

>
> Also, can you put this code into a 'normal' error handler instead of
> using if/else ?
>
> if (!sensor) {
> pr_err("Opal node 'sensors' not found\n");
> return -ENODEV;
> }
> pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
> ...
>
> This would make the code flow easier to understand.
>
> Thanks,
> Guenter
>
>> + return -ENODEV;
>> + }
>> +
>> + return PTR_ERR_OR_ZERO(pdev);
>> +}
>> +machine_subsys_initcall(powernv, opal_sensor_init);
>> diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
>> index 6a30eee..c7577b8 100644
>> --- a/drivers/hwmon/ibmpowernv.c
>> +++ b/drivers/hwmon/ibmpowernv.c
>> @@ -74,9 +74,6 @@ struct platform_data {
>> u32 sensors_count; /* Total count of sensors from each group */
>> };
>>
>> -/* Platform device representing all the ibmpowernv sensors */
>> -static struct platform_device *pdevice;
>> -
>> static ssize_t show_sensor(struct device *dev, struct
>> device_attribute *devattr,
>> char *buf)
>> {
>> @@ -99,7 +96,7 @@ static ssize_t show_sensor(struct device *dev,
>> struct device_attribute *devattr,
>> return sprintf(buf, "%u\n", x);
>> }
>>
>> -static int __init get_sensor_index_attr(const char *name, u32 *index,
>> +static int get_sensor_index_attr(const char *name, u32 *index,
>> char *attr)
>> {
>> char *hash_pos = strchr(name, '#');
>> @@ -136,7 +133,7 @@ static int __init get_sensor_index_attr(const
>> char *name, u32 *index,
>> * which need to be mapped as fan2_input, temp1_max respectively
>> before
>> * populating them inside hwmon device class.
>> */
>> -static int __init create_hwmon_attr_name(struct device *dev, enum
>> sensors type,
>> +static int create_hwmon_attr_name(struct device *dev, enum sensors
>> type,
>> const char *node_name,
>> char *hwmon_attr_name)
>> {
>> @@ -172,7 +169,7 @@ static int __init create_hwmon_attr_name(struct
>> device *dev, enum sensors type,
>> return 0;
>> }
>>
>> -static int __init populate_attr_groups(struct platform_device *pdev)
>> +static int populate_attr_groups(struct platform_device *pdev)
>> {
>> struct platform_data *pdata = platform_get_drvdata(pdev);
>> const struct attribute_group **pgroups = pdata->attr_groups;
>> @@ -180,11 +177,6 @@ static int __init populate_attr_groups(struct
>> platform_device *pdev)
>> enum sensors type;
>>
>> opal = of_find_node_by_path("/ibm,opal/sensors");
>> - if (!opal) {
>> - dev_dbg(&pdev->dev, "Opal node 'sensors' not found\n");
>> - return -ENODEV;
>> - }
>> -
>> for_each_child_of_node(opal, np) {
>> if (np->name == NULL)
>> continue;
>> @@ -221,7 +213,7 @@ static int __init populate_attr_groups(struct
>> platform_device *pdev)
>> * to the name required by the higher 'hwmon' driver like
>> fan1_input, temp1_max
>> * etc..
>> */
>> -static int __init create_device_attrs(struct platform_device *pdev)
>> +static int create_device_attrs(struct platform_device *pdev)
>> {
>> struct platform_data *pdata = platform_get_drvdata(pdev);
>> const struct attribute_group **pgroups = pdata->attr_groups;
>> @@ -280,7 +272,7 @@ exit_put_node:
>> return err;
>> }
>>
>> -static int __init ibmpowernv_probe(struct platform_device *pdev)
>> +static int ibmpowernv_probe(struct platform_device *pdev)
>> {
>> struct platform_data *pdata;
>> struct device *hwmon_dev;
>> @@ -309,52 +301,31 @@ static int __init ibmpowernv_probe(struct
>> platform_device *pdev)
>> return PTR_ERR_OR_ZERO(hwmon_dev);
>> }
>>
>> +static const struct platform_device_id opal_sensor_driver_ids[] = {
>> + {
>> + .name = "opal-sensor",
>> + },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
>> +
>> static struct platform_driver ibmpowernv_driver = {
>> - .driver = {
>> - .owner = THIS_MODULE,
>> - .name = DRVNAME,
>> + .probe = ibmpowernv_probe,
>> + .id_table = opal_sensor_driver_ids,
>> + .driver = {
>> + .owner = THIS_MODULE,
>> + .name = DRVNAME,
>> },
>> };
>>
>> static int __init ibmpowernv_init(void)
>> {
>> - int err;
>> -
>> - pdevice = platform_device_alloc(DRVNAME, 0);
>> - if (!pdevice) {
>> - pr_err("Device allocation failed\n");
>> - err = -ENOMEM;
>> - goto exit;
>> - }
>> -
>> - err = platform_device_add(pdevice);
>> - if (err) {
>> - pr_err("Device addition failed (%d)\n", err);
>> - goto exit_device_put;
>> - }
>> -
>> - err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe);
>> - if (err) {
>> - if (err != -ENODEV)
>> - pr_err("Platform driver probe failed (%d)\n", err);
>> -
>> - goto exit_device_del;
>> - }
>> -
>> - return 0;
>> -
>> -exit_device_del:
>> - platform_device_del(pdevice);
>> -exit_device_put:
>> - platform_device_put(pdevice);
>> -exit:
>> - return err;
>> + return platform_driver_register(&ibmpowernv_driver);
>> }
>>
>> static void __exit ibmpowernv_exit(void)
>> {
>> platform_driver_unregister(&ibmpowernv_driver);
>> - platform_device_unregister(pdevice);
>> }
>>
>> MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
>>
>>
>



\
 
 \ /
  Last update: 2014-11-04 23:01    [W:0.055 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site