lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
Dear, Addy.

On 11/03/2014 07:23 PM, addy ke wrote:
> Hi, Jaehoo
>
> On 2014/11/3 16:59, Jaehoon Chung wrote:
>> Hi, Addy.
>>
>> On 11/03/2014 10:20 AM, Addy Ke wrote:
>>> The bit of sdio interrupt is 16 in designware implementation,
>>> but it is 24 on Rockchip SoCs.This patch add sdio_id0 for the
>>> number of slot0 in the SDIO interrupt registers.
>>>
>>> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
>>> ---
>>> Changes in v2:
>>> - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next branch
>>> Changes in v3:
>>> - Remove dts for sdio_id0, just replace this with 8, suggested by Doug
>>> - Change to support all Rockchip Socs, suggested by Heiko
>>>
>>> drivers/mmc/host/dw_mmc-rockchip.c | 10 ++++++++++
>>> drivers/mmc/host/dw_mmc.c | 12 +++++++-----
>>> drivers/mmc/host/dw_mmc.h | 2 ++
>>> include/linux/mmc/dw_mmc.h | 3 +++
>>> 4 files changed, 22 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
>>> index bbb4ec3..b997c8f 100644
>>> --- a/drivers/mmc/host/dw_mmc-rockchip.c
>>> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
>>> @@ -68,14 +68,24 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>>> }
>>> }
>>>
>>> +static int dw_mci_rockchip_parse_dt(struct dw_mci *host)
>>> +{
>>> + /* It is slot 8 on Rockchip SoCs */
>>> + host->sdio_id0 = 8;
>>> +
>>> + return 0;
>>> +}
>>
>> Well, function is "__parse_dt__", but this function don't parse anything.
>> If All rockchip soc is supported, i think that it can be located to other place.
>>
> Can add it in "init" function? like this:
> int dw_mci_rockchip_init(struct dw_mci *host)
> {
> /* It is slot 8 on Rockchip SoCs */
> host->sdio_id0 = 8;
>
> return 0;
> }
> static const struct dw_mci_drv_data xxxx {
> ....
> .init = dw_mci_rockchip_init,
> };

I think good this solution is used. "init-hook" can be also used in future.
When you resend the patch, i will reply with my-ack.

Best Regards,
Jaehoon Chung

>
>
>> Best Regards,
>> Jaehoon Chung
>>
>>> +
>>> static const struct dw_mci_drv_data rk2928_drv_data = {
>>> .prepare_command = dw_mci_rockchip_prepare_command,
>>> + .parse_dt = dw_mci_rockchip_parse_dt,
>>> };
>>>
>>> static const struct dw_mci_drv_data rk3288_drv_data = {
>>> .prepare_command = dw_mci_rockchip_prepare_command,
>>> .set_ios = dw_mci_rk3288_set_ios,
>>> .setup_clock = dw_mci_rk3288_setup_clock,
>>> + .parse_dt = dw_mci_rockchip_parse_dt,
>>> };
>>>
>>> static const struct of_device_id dw_mci_rockchip_match[] = {
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index bb46b1b..a633b58 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
>>>
>>> /* enable clock; only low power if no SDIO */
>>> clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
>>> - if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
>>> + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
>>> clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
>>> mci_writel(host, CLKENA, clk_en_a);
>>>
>>> @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
>>> dw_mci_disable_low_power(slot);
>>>
>>> mci_writel(host, INTMASK,
>>> - (int_mask | SDMMC_INT_SDIO(slot->id)));
>>> + (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
>>> } else {
>>> mci_writel(host, INTMASK,
>>> - (int_mask & ~SDMMC_INT_SDIO(slot->id)));
>>> + (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
>>> }
>>> }
>>>
>>> @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>> /* Handle SDIO Interrupts */
>>> for (i = 0; i < host->num_slots; i++) {
>>> struct dw_mci_slot *slot = host->slot[i];
>>> - if (pending & SDMMC_INT_SDIO(i)) {
>>> - mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
>>> + if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
>>> + mci_writel(host, RINTSTS,
>>> + SDMMC_INT_SDIO(slot->sdio_id));
>>> mmc_signal_sdio_irq(slot->mmc);
>>> }
>>> }
>>> @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>>
>>> slot = mmc_priv(mmc);
>>> slot->id = id;
>>> + slot->sdio_id = host->sdio_id0 + id;
>>> slot->mmc = mmc;
>>> slot->host = host;
>>> host->slot[id] = slot;
>>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>>> index 71d4995..0562f10 100644
>>> --- a/drivers/mmc/host/dw_mmc.h
>>> +++ b/drivers/mmc/host/dw_mmc.h
>>> @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host);
>>> * with CONFIG_MMC_CLKGATE.
>>> * @flags: Random state bits associated with the slot.
>>> * @id: Number of this slot.
>>> + * @sdio_id: Number of this slot in the SDIO interrupt registers.
>>> */
>>> struct dw_mci_slot {
>>> struct mmc_host *mmc;
>>> @@ -233,6 +234,7 @@ struct dw_mci_slot {
>>> #define DW_MMC_CARD_PRESENT 0
>>> #define DW_MMC_CARD_NEED_INIT 1
>>> int id;
>>> + int sdio_id;
>>> };
>>>
>>> struct dw_mci_tuning_data {
>>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>>> index 69d0814..72c319f 100644
>>> --- a/include/linux/mmc/dw_mmc.h
>>> +++ b/include/linux/mmc/dw_mmc.h
>>> @@ -96,6 +96,7 @@ struct mmc_data;
>>> * @quirks: Set of quirks that apply to specific versions of the IP.
>>> * @irq_flags: The flags to be passed to request_irq.
>>> * @irq: The irq value to be passed to request_irq.
>>> + * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
>>> *
>>> * Locking
>>> * =======
>>> @@ -191,6 +192,8 @@ struct dw_mci {
>>> bool vqmmc_enabled;
>>> unsigned long irq_flags; /* IRQ flags */
>>> int irq;
>>> +
>>> + int sdio_id0;
>>> };
>>>
>>> /* DMA ops for Internal/External DMAC interface */
>>>
>>
>>
>>
>>
>
>



\
 
 \ /
  Last update: 2014-11-04 03:41    [W:0.101 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site